That’s why many people choose to buy a lowering block kit. A lowering block kit is a complete suspension kit that allows you to lower your car without having to worry about all the little details.
It usually comes with everything you need to lower your car, including shocks, springs, and control arms. And best of all, it doesn’t break the bank.
If you’re looking to lower your car, a lowering block kit is one option to consider. This type of kit typically includes blocks that are placed between the springs and the frame of the vehicle.
The blocks can be made from a variety of materials, but they all serve the same purpose: to lower the ride height of your car.
There are a few things to keep in mind if you’re considering a lowering block kit. First, it’s important to make sure that the blocks are compatible with your car’s suspension system.
Second, you’ll need to decide how much you want to lower your car. Typically, 1-2 inches is enough to achieve a noticeable difference.
And finally, be aware that lowering your car will affect its handling and performance characteristics; so it’s important to test drive it after installation before hitting the open road.
If you have ever lowered a car, then you know that it can be quite a difficult process. There are many things that need to be taken into account, such as ride height, camber, and toe. And if you don’t do it right, your car will handle like crap
Table of Contents
What Do Lowering Blocks Do?
Lowering blocks are car suspension components that are used to lower the ride height of a vehicle. They are installed between the coil spring and the chassis, and work by reducing the amount of space between the two.
This effectively lowers the center of gravity of the vehicle, which can improve handling and performance. Lowering blocks can be made from various materials, including aluminum, steel, and polyurethane.
Click Here To Learn More About: How Do Lowering Blocks Work
How Do You Install Lowering Blocks?
Lowering blocks are a great way to lower the rear end of your car. They are simple to install and will give you the stance you desire. Here is a quick guide on how to install lowering blocks.
You will need:
- 2 Jacks
- 4 Jack stands
- 1 Wrench set
- 1 Torque wrench
- 1 Tape measure
- 1 Marker or pen Installation
Instructions:
- Park your car on a level surface and engage the emergency brake. Place jack stands under the frame of the car on both sides. Do not place the jack stand under the axle or control arm as this can damage them. Slowly lower your car onto the jack stands being careful not to put too much pressure on one side.
- With your vehicle now safely supported, locate your old shocks at the top by following the coil spring down. There should be two bolts holding it in place with nuts on each side (one above and one below). Remove these bolts with a wrench but do not remove completely as you will need them later to reinstall your new shocks absorber. If necessary, use penetrating oil around these bolts prior to removal as they may be difficult to remove after years of rust buildup. Also, take note of any washers that may be present so that you can reuse them during installation.
- For vehicles without an upper shock mount bushing. For vehicles WITH an upper shock mount bushing – Using a suitable tool (i.e., flat head screwdriver), pry out old bushing from housing taking care not damage surrounding area. Clean out housing thoroughly making sure there no remnants of old bushing left behind as this can cause installation issues later on.
- For vehicles without an upper shock mount cup for vehicles with an upper shock mount cup – Using a suitable tool (i .e., hammer and chisel OR flat head screwdriver), break off cup from inside housing taking care not damage surrounding area.. Clean out housing thoroughly making sure there no remnants of old cup left behind as this can cause installation issues later on.
- For coil spring cars – Using a spring compressor, compress coil spring enough so that you can safely remove it from vehicle whilst still maintaining support for chassis with jack stands.
What Lowered Blocks?
There are a few reasons why your blocks may be lowered. It could be due to the weight of the block, or it could be because the block was not cut properly.
If you suspect that your block is too heavy, you can try to lighten it by removing some of the material from the bottom of the block.
If you think that your block was not cut properly, you should take it back to the store where you bought it and have them fix it.
Also Read: S10 Drop Spindles Vs Stock
How Much Does a Flip Kit Lower a Truck?
A flip kit is a popular suspension upgrade for lifted trucks. Often, people ask how much a flip kit will lower their truck. The answer depends on the truck’s suspension and the size of the flip kit.
For example, if a truck has a 6-inch suspension lift, and the flip kit lowers the truck 2 inches, then the new ride height would be 4 inches.
If the same truck had an 8-inch suspension lift, then the new ride height with the 2-inch lowering flip kit would be 6 inches. In other words, a flip kit will lower a truck by half of its Suspension Lift Kit (SLK) size.
It’s important to keep in mind that while SLKs are measured from factory specifications, actual heights can vary due to factors like spring sag, body weight and tire size.
That’s why it’s always best to measure your own truck before ordering any type of lowering or lifting modification.
2 Inch Lowering Block Kit
If you’re looking to lower your car, a 2 inch lowering block kit is a great option. This type of kit typically includes two lowering blocks, four bolts, and instructions.
Lowering blocks are installed between the spring and axle on each side of the car, and they work by effectively reducing the height of your car.
This can give it a more aggressive look, as well as improve handling and performance.
There are a few things to keep in mind when installing lowering blocks:
- First, make sure that the blocks are properly aligned before tightening the bolts.
- Second, be careful not to overtighten the bolts, as this can damage the threads.
- And finally, if you have any doubts about whether or not you’re doing it correctly, it’s always best to consult with a professional mechanic.
1″ Lowering Blocks
1″ Lowering blocks are a simple and effective way to lower the rear of your vehicle. They are installed between the spring and axle, and will lower your vehicle by 1″.
This is a popular mod for those looking to improve the stance of their ride, or who want to install larger wheels and tires.
There are a few things to keep in mind when installing lowering blocks.
- First, they will change the geometry of your suspension, so it is important to have an alignment done after installation.
- Second, lowering blocks can put extra stress on your shocks and springs, so it is important to inspect them regularly.
- And finally, always make sure that the blocks you purchase are designed for your specific vehicle.
If you’re looking to improve the look of your car without breaking the bank, then 1″ lowering blocks are a great option. Keep in mind though that they do require some maintenance down the road.
2″ Lowering Blocks
If you are looking to lower your car, one option is to use lowering blocks. Lowering blocks are installed between the leaf spring and axle on each side of the car, and they lower the ride height by 2 inches.
This can be a good option if you are looking for a low-cost way to lower your car. There are a few things to keep in mind when using lowering blocks:
- First, because the blocks raise the axle, they will also change the angle of the driveshaft. This can cause vibration at high speeds, so it is important to check that the driveshaft is properly balanced after installing lowering blocks.
- Second, because lowering blocks change the suspension geometry, they may impact handling. Be sure to test drive your car after installing lowering blocks to make sure that it handles well.
- Finally, because lowering blocks only lower the back of the car, they may give it a “nose-down” look.
If this is not desired, consider adding coilovers or airbags to the front of the car as well.
4 Inch Lowering Blocks
If you want to lower your car, one option is to use 4 inch lowering blocks. These blocks are placed between the leaf spring and the axle, and they effectively lower the ride height of your car.
There are a few things to keep in mind when using lowering blocks:
- First, they will change the geometry of your suspension, which can affect handling.
- Second, they may not provide a completely level stance – one side may be higher than the other.
- Finally, if you have a coil spring suspension, you’ll need to make sure that the lowered ride height doesn’t bottom out when driving over bumps.
If you’re unsure about any of this, it’s best to consult with a professional before making any changes to your suspension.
1/2 Lowering Blocks
If you have a car with a suspension that is too high, it can be dangerous. The car may bottom out over bumps and potholes, and it could be difficult to control in an emergency situation.
If you want to lower your car’s suspension, one option is to install lowering blocks. Lowering blocks are installed between the axle and the leaf spring or coil spring.
They are available in various sizes, so you can choose the amount of drop that you want. Installing lowering blocks is not a difficult task, but it is important to do it carefully. Make sure that the blocks are properly positioned and secured before driving your car.
3 Inch Lowering Blocks
3 Inch Lowering Blocks are the perfect way to lower your vehicle without compromising on quality or performance.
With a set of lowering blocks installed, you’ll be able to achieve a lower center of gravity for improved handling and stability.
Additionally, lowering your vehicle will also make it look more aggressive and stylish. If you’re looking to install a set of lowering blocks on your vehicle, there are a few things you’ll need to keep in mind.
First, make sure that the blocks you purchase are compatible with your vehicle’s suspension system. Next, you’ll need to determine how low you want to go before making any cuts or adjustments to your suspension system.
Finally, when installing the blocks, be sure to follow all instructions carefully to avoid damaging your vehicle or voiding any warranties.
Installing a set of 3 inch lowering blocks is a great way to improve the look and performance of your vehicle. Just be sure to do your research and take all necessary precautions during installation.
Belltech Lowering Blocks
Belltech Lowering Blocks are a great way to lower your truck or SUV. They are made of high quality materials and are very easy to install.
Lowering Blocks Autozone
If your vehicle is sitting too high, or you just want it to be lower to the ground, one option is to lower your blocks.
Blocks are available at most auto parts stores, and lowering your vehicle with blocks is a relatively easy process.
The first thing you’ll need to do is measure the height of your vehicle from the ground to the top of the wheel well. Check the link here.
You’ll want to make sure that you get accurate measurements so that you know how much you need to lower your vehicle.
Once you have your measurements, head on over to AutoZone and pick up some lowering blocks. Lowering blocks are essentially just blocks of metal that go between your axle and spring.
They come in different sizes, so make sure you get ones that will lower your vehicle by the amount that you measured earlier.
To install them, simply place them between your axle and spring, and then bolt them in place. Once they’re installed, check your vehicle’s ride height again and make sure it’s where you want it to be.
If it’s not, simply adjust the blocks until it is. And that’s all there is to it! Lowering your vehicle with blocks is an easy way to achieve the look that you want without having to spend a lot of money on suspension modifications.
Conclusion
A lowering block kit is a set of blocks or spacers that are used to lower the ride height of a vehicle. The most common use for these kits is to lower the front end of a truck or SUV, but they can also be used to level out a vehicle that has been lowered in the rear.
Lowering block kits usually come with all of the necessary hardware and instructions for installation.
