Ford Fusion Headlight Bulb Size

The Ford Fusion is a mid-size car produced by the North American automobile manufacturer Ford. It is available as a four-door sedan, five-door station wagon, and two-door convertible. The first generation of the Fusion was introduced for the 2008 model year.

One of the most frequent problems Ford drivers experience is with their headlights. That’s why it’s important to know how to replace a headlight bulb on your 2013 Ford Fusion before you need emergency repairs.

H11 Halogen Bulb is best for the 2013 ford fusion headlight bulb replacement. This article will tell you how to replace a headlight on your Ford Fusion.

How Much Is A Ford Fusion Headlight Bulb?

How Much Is A Ford Fusion Headlight Bulb?

Replacement headlight bulbs for a Ford Fusion typically cost between $113 and $133. While components are priced at $35, labor expenses are predicted to range from $78 to $98.

What Kind of Headlight Bulbs Does A Ford Fusion Use?

A Ford Fusion uses halogen headlight bulbs. Halogen bulbs are commonly used in cars and other devices because they don’t contain toxic chemicals.

They are also long-lasting, easy to change, inexpensive, and provide plenty of light for driving at night. Additionally, these types of lights last for about 9 to 15 years before burning out.

Headlights with High Beams From 2006 until 2018, Ford Fusion’s high beam headlights used H7 lightbulbs.

Ford updated the high beam headlight bulb size to H9 in 2019. The high beam headlights of the Ford Fusion 2020 model also employ H9 light bulbs.

Can You Replace the Parking Light on A Ford Fusion?

Can You Replace the Parking Light on A Ford Fusion?

Yes, you can replace the front parking light on your Ford Fusion. However, it can be time-consuming, and there’s a slight risk of burns.

Replacing the parking light on your Ford Fusion only takes about one hour, and if you’re careful, you won’t get burned.

You’ll need to remove the front bumper and coolant recovery bottle first to access the light parking assembly.

Detach any electrical connectors that are attached to it by simply turning them counter-clockwise with your fingers or a pair of pliers.

How Do I Know If My Ford Fusion Bulb Sizes Are Correct?

The Fusion bulb sizes can be different between outside lights and inside lights in the car. This can cause confusion, and some people might be driving with the wrong bulbs. In order to make this decision easier, here are the bulb sizes:

The taillights of your Ford Fusion have some bulbs that require a bigger size than others. However, the bulbs in your trunk are supposed to be 60/55-watt bulbs.

The other sizes you can use to replace them are 3157NA and P21W. You can also combine these two together if you want a brighter light source from these lamps.

On the other hand, the stop lights on your Fusion are supposed to be 24/21 watt bulbs. The other sizes that you can use to replace them are 3157NA and P21W again. But if you want a brighter light source, you can use a combination of a 60/55 watt and a P21W.

 2007-20122013-20172018-2020
Backup Reverse LightT15 click for priceT15T15
Fog LightH11S click for priceH11SH11S
Low BeamH11m click for priceH11mH11m
High BeamH7 click for priceH7H11m

What Features Make the Ford Fusion So Successful?

What Features Make the Ford Fusion So Successful?

The number of cars sold by Ford, to name a few, is constantly increasing, and the Ford Fusion is one car that has been on the rise since it was first released.

1. Safety

The Ford Fusion has some of the safest cars on the market today with an advanced braking system and 18 airbags—it also includes an extensive list of crash avoidance technologies that help avert accidents in real-time.

2. Room

The trunk has a lot of available space for all your traveling needs, with 17 cubic feet of storage space.

3. Sound system

The standard sound system that comes with the Ford Fusion is great and can be easily upgraded if you have an ear for higher quality speakers or to fit any other audio accessories you may have in mind.

4. Style and design

What Features Make the Ford Fusion So Successful?

Overall, the design of the Ford Fusion is sleek and modern without being too over the top, like some cars today.

5. Safety features

The Ford Fusion has automatic braking and lane departure alerts that promote driver safety and keep you safe on the road.

6. Luxury car without the price tag

This car is great for anyone who wants a luxury vehicle but doesn’t have the budget for one. They offer luxury options for a lower price to accommodate any budget and can fit most drivers with their adjustable seats and cruise control.

7. SYNC

SYNC is an in-car technology built into Ford that helps you connect your mobile devices to your car, phone calls, music, and more.

It is compatible with many iOS and Android systems and can be easily downloaded on your phone or downloaded online. This can also help you control songs and playlists when used with a compatible music player.

8. Performance

The performance of the Ford Fusion is great for the price range and can go from zero to sixty in 8.6 seconds with its 1.5L EcoBoost engine.

How to Replace Low Beams In a 2013 Ford Fusion with H11 Bulbs

Low beams on your 2013 Ford Fusion are about to start flickering and need to be replaced with H11 bulbs. Here are the step-by-step instructions on how to do that job.

  • Step 1:  Place protective cloth, cardboard, or any other layer of protection between your vehicle’s headlight assembly and lens before removing the screws holding it in place at the center of the assembly.
  • Step 2:  Remove the screws using a socket wrench or ratchet.
  • Step 3:  Gently pull the assembly outward from your vehicle’s front end and disconnect it from the wiring harness.
  • Step 4:  Place your new H11 bulbs into position, connect your headlight assembly back to the wiring harness, and then place that assembly back into position at your Fusion’s front end.
  • Step 5:  Secure the headlight assembly back in place with the screws you removed in Step 1.

What is the headlight bulb for a 2013 Ford Fusion?

H7 is the high beam headlight, and H11 is the low beam headlight for a 2013 Ford Fusion. The H7 headlight bulb is a 60-watt bulb, and the H11 is a 40-watt bulb.

A warning light may indicate that your car’s high beam headlight circuit has failed, which means it does not stay on when you turn on the low beam headlights. If this happens, you will need a new fuse or wiring harness to get it fixed.

How do you change a headlight bulb in a 2013 Ford Fusion?

How do you change a headlight bulb in a 2013 Ford Fusion?

If you’ve ever replaced a headlight bulb in a 2013 Ford Fusion, you know that it doesn’t happen alone. All of the tools and parts are crammed into your trunk, with no place to put them once they’re out. Here are the 5 steps for changing a headlight bulb in a 2013 Ford Fusion —

1. Remove Your Trunk

The tools you need for this job are all in your trunk. The first step is to remove the trunk trim panel in your Fusion.

After that, you’ll need to pull out the spare tire and hop into the trunk. If your Fusion doesn’t have a spare tire, you’ll instead see a rectangle cavity running along the left edge of your trunk. You’ll need to pop that out in order to get access to the spare tire well or alternator well.

2. Unscrew the Headlight

Remove the screws holding the headlight in place.

3. Remove the Headlight Fixing Screws

Here’s what’s going on beneath your Fusion’s headlight. There are two screws holding your headlight into place, and those screws are covered by plastic covers. Those plastic covers will be the first thing to break if you try to use a regular screwdriver on them.

Here’s what to do instead. Use a rubber bar to press on the headlight housing and gently twist the screws out of their slots, then pull the headlight housing out of its mount.

4. Remove Your Old Headlight Bulb

Remove Your Old Headlight Bulb

Here’s your old headlight bulb on top of a new one, ready to go back in place. It has a plastic plug inside that you need to remove before you can put it back in place.

5. Remove the New Headlight Bulb

The next step is to remove your new headlight bulb from its packaging. This takes a steady hand and patience. After you remove the bulb, there will be a small plastic cover below it that needs to be pried off with pliers.

6. Install Your New Headlight Bulb

How much does it cost to replace a headlight on a 2013 Ford Fusion?

Replacement headlight bulbs for a Ford Fusion typically cost between $179.95 and $229.40. In order to replace a headlight, you will need screwdrivers, an electric drill, and sockets.

This is the cost if you do not have these tools and equipment. There is the possibility to find used tools or tools that are free at your local hardware store, but it’s still best to be prepared with these items, so you don’t spend more than needed on replacement bulbs.

What Kind of Headlights Does A Ford Fusion Use?

What Kind of Headlights Does A Ford Fusion Use?

The most common problem with a Ford Fusion is the headlights. Car owners have experienced issues with the headlights and other lighting systems on the car.

With a bit of research and patience, you can diagnose the cause of your issue. From 2006 until 2018, Ford Fusion’s high beam headlights utilized H7 lightbulbs.

Ford updated the high beam headlight bulb size to H9 in 2019. The high beam headlights of the Ford Fusion 2020 model also employ H9 light bulbs.

2006 – 2020 Ford Fusion Halogen to LED Replacement Bulb

You’ve probably heard by now that Ford has announced that they are phasing out Halogen bulbs in their vehicles starting with the 2006 model year and continuing through 2020. Here are the replacement bulbs-

Ford Fusion2006-20122013-20162017-20182019-2020
Backup LightT15T15T15T15
Front Fog LightH11H11H11H11
High Beam HeadlightH7H7H7H11
Low Beam HeadlightH11H11H11H11

2015 Ford Fusion Headlight Bulb Replacement

Use H7 bulbs for high beams and H11 bulbs for low beams for the 2015 ford fusion headlight bulb replacement.

The first step in changing a headlight bulb is opening up the hood on your car, so you can get access to the headlight assembly.

Look for the screws that are holding the headlight assembly in place. You may have to remove the grille and bumper on some models as well to see where the screws are located.

Once you have found your headlight assembly, there will be wires running from it to other parts of your car.

Disconnect these wires so you can get access to the bulb holder. Note how these wires are attached before removing them from your car.

This will make it easier for you to remember how they are attached when putting everything back together again.

Remove the bulb holder by turning it counter-clockwise. Once you have removed the bulb holder, remove the old bulb and replace it with a new one. Screw the new bulb into place and reconnect any disconnected wires.

Tighten all of your screws so that everything is secure and working properly before closing your hood to finish changing your headlight bulb.

2012 ford fusion headlight bulb size

The Ford Fusion is a car manufactured by the Ford Motor Company. This particular make and model is available in a wide range of sizes, shapes, and colors.

One of the features that may not be immediately noticeable about this vehicle is that there are two headlight bulbs for the high-beam headlight system.

Here is the 2012 ford fusion headlight bulb size chart:

Headlight BulbSize
High Beam LED Headlight BulbH7 LED
High Beam Headlight BulbH7
Low Beam LED Headlight BulbH11 LED
Low Beam Headlight BulbH11

2008 Ford Fusion Headlight Bulb Size

Headlight BulbSize
High Beam LED Headlight BulbH7 LED
High Beam Headlight BulbH7
Low Beam LED Headlight BulbH11 LED
Low Beam Headlight BulbH11

2011 Ford Fusion Headlight Bulb Size

Headlight BulbSize
High Beam LED Headlight BulbH7 LED
High Beam Headlight BulbH7
Low Beam LED Headlight BulbH11 LED
Low Beam Headlight BulbH11

SYLVANIA H7 Headlight Bulb

SYLVANIA H7 Headlight Bulb

Dramatically improve your ride’s visibility with an extra-bright, halogen headlight bulb! This bulb uses a unique combination of high-intensity technology and advanced optics to deliver more than twice the luminous flux of conventional lamps.

The result is a light that’s up to three times brighter, more efficient, and lasts up to four times longer. And it does so in a slim-line, clean-burning design.

High-intensity technology for more than twice the luminous flux of conventional lamps. Uses advanced optics to deliver over twice the luminous flux of conventional H7 lamps.

Great for improved visibility and safety. High efficiency: 90% efficient at 2,000 hrs.2 Slim, clean-burning design Uses an H7 socket bulb.

Philips H7 Headlight Bulb

Philips H7 Headlight Bulb

In the past, headlights were not as bright, and they did not last as long. But times have changed dramatically over the course of the last decade, and now headlights are much brighter as well as more efficient.

This innovative product from Philips is one such light bulb that is easy to install, has a wide range of uses, and comes at an affordable price.

If you drive at night, especially in harsh conditions, you need to be aware of the risk of glare. Glare is blinding and can prevent another driver from being able to see the road or even cause a car accident.

With help from these bulbs from Philips, that risk is greatly reduced because it produces a high beam light that reduces the risk of glare for other drivers. This type of light bulb is also known as an H7 headlight bulb or HID headlamp bulb.

Aukee H7 LED Headlight Bulb

Aukee H7 LED Headlight Bulb

If you love the safety and convenience of a car’s headlights but have been concerned about the performance of your stock headlights on darker roads, then it is time for an upgrade.

All you need are new headlights! And if that’s what you want, then Aukee H7 LED Headlight Bulb will be a perfect fit for your car.

This model is guaranteed to provide stunning illumination that covers up to 500 meters away. With this Headlight Bulb, there’s no need to feel uncomfortable about driving your car, even if nighttime is nearing.

The light beam that these headlights produce is so bright that you can easily cut through heavy fog and smoke.

But don’t worry because there won’t be any glare for other drivers on the road once your car lights up! The bulbs are designed to provide maximum comfort for you, as well as ease for other drivers.

Nilight H11 LED Headlight Bulbs

Nilight H11 LED Headlight Bulbs

The Nilight H11 LED Headlight Bulbs is a headlamp with very high light intensity. It uses the latest Cree XM-L2 U2 LEDs that produce up to 10,000 lumens.

They are perfectly compatible with 2 AA batteries and have a single switch button. The light beam can be focused or spread out at will during use, and you can also adjust the brightness of the bulb by pressing it firmly. The headlamp comes with its own carrying case and an extra set of batteries too.

You don’t need to worry about getting lost in the dark and having to dig for your keys with this. Just point the headlamp at the ground, and it will light it up for you.

This is a truly highly practical flashlight that would be great for trail hiking, camping, or general traveling.

The 100-meter beam distance is also above average and can light up even some far-off objects without any problem.

LA Plus Series H8 H11 H16 LED Fog Light

Introducing the brand new LA PLUS series H8, H11, and H16 LED fog light bulbs. These are the latest in our lineup of high-quality LEDs for car fog lights!

These bulbs are a whopping 60W each, which allows them to provide 6000lm at 6000K! They emit a super-bright beam of light that rivals just about anything on the market today.

The cool white color is perfect for street driving, where it will help you see objects even under low visibility conditions.

1. Low Bean H11 LED bulbs

2. Fog lights H11 LED bulbs

3. License plate lights

4. Backup lights

Back Up Light T15

White

Back Up Light T15

“TGP T15 WHITE 13 LED backup reverse light” by FUSION comes with standard 12 and 25 feet cables, a keychain ring, and modes for steady or flashing use. It also comes in white color.

Fusion Technologies is dedicated to building high-quality automotive products to create “Outstanding Value .”

They have three decades of experience in R&D and manufacturing, which are reflected throughout their strong product lineup.

Blue

Back Up Light T15

The TGP T15 Blue 9 LED Backup Light is manufactured by Wedge. The Ford Fusion backup lights use a wedge reverse color for backup lights.

The wedge reverse color is only available for the 2006-2013 Ford Fusion. The TGP Blue 9 LED Backup Light only fits the 2006-2013 Ford Fusion with the 6.5″ backup light housing.

The TGP Blue 9 LED Backup Light has a standard reverse lens design with a 6″ wide chrome bezel and an 18″ long bulb holder arm. It has an operating range of 31-63 MPH and includes a 2-year manufacturer’s warranty.

White

TGP T15 WHITE 42 LED

The TGP T15 White LED Backup Lights will help everyone behind you see you when backing up or chasing someone on the highway.

This product can be improved in many ways, but I think that the most important things are these. The TGP white LED backup light is a very simple LED light to install. However, the wires coming out of the back box are very short and hard to work with.

9006 led fog lights

2013 Ford Fusion Headlight Assembly

2013 Ford Fusion Headlight Assembly

If you need to replace your failing headlight assembly for your 2013-2015 model year, this is one of the best replacement assemblies currently on the market.

For a very affordable price, you can have the exact same assembly that is made by Toyota for only $121.

The assembly is easy to install and perfect for keeping your vehicle safe in night driving. The headlight assembly is made to fit perfectly in the car, with a high-quality silicone gasket that fits well without warping or tearing easily.

The assembly also comes with metallic brackets attached to the headlight and a heavy-duty rubber seal that works great.

The light is made of deep parabolic reflectors that give you great illumination over a long range, and it can last for years without needing replacement.

It uses Halogen bulbs which are easy to install and come with your purchase of the product if you need replacements down the road.

Questions for your interest

What is a T15 bulb?

The letter “T” stands for “tubular” in all of the lighting jargon and has no additional unique meanings. The same socket was used by T10 and T15.

The size of the bulb is the main differential between T10 and T15. T10 LED light bulbs have a diameter of 0.375 inches and a length of 0.8 inches; T15 LED light bulbs to have a diameter of 0.5 inches and a length of 1.1 inches.

Also Read: Factory HID to LED Conversion

Conclusion

Ford Fusion headlight bulb replacement instructions are not very difficult to follow. It is not a difficult job whether you replace the bulb or change it.

All you have to do is open the hood, locate the light, and remove it from its socket. After removing the old light from the socket, you need to disconnect one wire at a time and connect them back on again with new wires (binding posts) while paying attention that they’re inserted in their right spots. I hope this article helps you make your decision on the 2013 ford fusion headlight bulb replacement.

About The Author

Leave a Comment

Your email address will not be published.