Fluke has two logging multimeter models-Fluke 287 and Fluke 289 with different performance capabilities.
Fluke 289 has a low pass filter whereas Fluke 287 does not have this feature. Fluke 289 has also low impedance. This feature also helps to get better accuracy like the low pass filter.Fluke 289 gets the advantage in the battle in some other sectors too. Like Motor drive measurement and low ohm measurement. On the other hand, the only pleasing thing about the Fluke 287 is that it costs less than Fluke 289.
The similarities are more than the differences in the relation between Fluke 287 and Fluke 289. You will get some additional features in Fluke 289. And the rest of the features are all the same. Thus, you can say Fluke 289 is the big brother of Fluke 287.
Let’s compare Fluke 289 vs Fluke 287 Multimeters. Fluke 287 vs 289 Review details here-
Difference Between Fluke 289 and 287
| Parameter | Fluke 287 | Fluke 289 |
| Low impedance | No | Yes |
| Low pass filter | No | Yes |
| Measuring Motor Drive (ASD) | No | Yes |
| Low Ohm measurement | No | Yes |
| Storage | Hard Drive | Internal Memory |
Fluke 287 vs 289 Review – Multimeter Comparisons
The Fluke 287 Multimeter key features
True RMS multimeter: Maybe you all know, what a true RMS multimeter is. In case you do not, in short, a true RMS multimeter is more accurate than a non-tRMS meter. As Fluke 287 has a true RMS feature, it will definitely help you get more accurate readings from the tests.
- The accuracy of DC is 0.025%, bandwidth is 100 kHz AC, 100mF capacitance
- Can Measure the voltage of up to 10 amps.
And thus you are not compromising on accuracy. It has an optional ir3000 FC connector that uses infrared technology. Moreover, it is highly compatible with the mobile software dubbed Fluke Connect. You can share information with any person with the help of the ir3000 FC WiFi connector.
Zoom and logging Capability: Fluke 287 multimeter has zoom capabilities up to a 14x view and analyzes TrendCapture data in depth where you can easily log. to get high accuracy and to attain optimal performance it acts reliably and displays occurrences in graphics. No doubt, it is best for convenience and accuracy.
Trend capture: With this feature in Fluke 287, you will be able to get a better understanding of the data sessions that are logged. Because the Trendcapture feature will let you see whether there is any anomaly that has occurred or not.
Backlit display: The display of Fluke 287 is great. The features the display of this multimeter alone gives are worth the whole price. Along with the backlit display, you will get a dot matrix display that is really good for drawing graphs. The display can show four separate types of data so that you have a very good understanding of the reading.
Min/Max mode: Min/Max mode is another handy feature to have in a multimeter. With this feature, you will get the minimum and maximum reading of a test along with the average reading.
Fluke 287 Multimeter Specification
- features a large 50,000 count, ¼ VGA display located at the back.
- Duty Cycle 0.01% to 99.99% and comes with-
- 6 AA batteries,
- a user manual (available in 16 languages),
- a probe holder,
- TL71 silicone test leads, and
- a couple of AC72 alligator clips.
Fluke 287 Review
Pros
- 50,000 count: The count of the display of Fluke 287 is 50,000. You know what that means. You will get a very sharp and high-end resolution display in Fluke 287.
- Real-time Clock: Though it may not seem a great deal, it is a handy feature to have. You will see the differences during your work. With the real-time clock, you will be able to get time stamped reading every time. It will help you a lot at the end of a session or a day by providing you a detailed reading.
- Great auto-ranging: Although Fluke 287 has both manual and auto-ranging feature, we are counting this feature alone as an advantage. Because the auto-ranging feature is great and can work to that extent to make a difference.
Cons
- Large and heavy: The feature-packed multimeter may make you a little bit uncomfortable in the field. Because the size of the meter is large and it is very heavy to carry. If you are not comfortable with such a heavy meter, you will feel disappointed working with it.
- Batteries are not up to the mark: The dot matrix display makes the multimeter a high-end one. But in addition, it also makes the meter battery hungry. That is why you won’t get much battery backup with this multimeter.
- Problematic Fluke Connect adapter: You will not be able to use the adapter easily. Forking out the adapter may be the key to use it properly.
How do you use Fluke 287?
The Fluke 289 Multimeter Key features
Relative mode: With the relative mode, you can store an existing reading and at the same time reset the display. And in the next reading, you will be able to compare both the readings. Isn’t it a great feature to have? We think so.
Data logging: One of the great features that makes Fluke 289 stand out among other multimeters is data logging. With this feature, you will be able to log data and even save logging sessions for further use. It can run 100 hours and 200 hours in the logging mode (apprx.).
Dot-matrix display: Fluke 289 also has a dot matrix display. That means it has a great display to show the graphs and readings. You will face no problems regarding the resolution and it even has a backlit feature to help you in the dark.
True RMS: Fluke 289 has also the true RMS feature. With this feature, you can easily get top-notch and accurate readings. When accuracy is the thing you crave, it is a must-have feature.
Fluke 289 Review
Pros
- Low pass filter: It is an addition to Fluke 287. You can measure performance by blocking voltages when it is above 1 kHz.
- Smoothing mode: With a selectable AC filter, you can get smooth and steady results from a noisy or an erratic reading. It will help you a lot to get better accuracy.
- Low impedance: With the low impedance voltage feature, you can get more accurate results. This feature does this by imparting low impedance on the test leads so that the ghost voltages get eliminated. Thus, you will get more accurate results.
- Rugged build: The build quality of Fluke 289 is also great. It has a rugged build to ensure its protection during works.
Cons
- Booting: Even though it is a high-end multimeter, it takes some more seconds while booting up. It may seem annoying to you as you are paying a hefty amount of money to get your hands on this device.
- Need separate adapter to connect additional devices: You will need a separate adapter to connect the multimeter with a PC or a smartphone.
- Battery life is not great: Just like the Fluke 287, the battery life of Fluke 289 may not please you. At this price, the battery life you will get is really disappointing which is stated as only 200 hours (100 hours minimum).
How do I get data from Fluke 289?
Fluke 287 VS 289: Multimeter Difference and Similarities
Both model measure resistance, capacitance, frequency, current, voltage, temperature, duty cycle, pulse width and conductance.
Similarities
- Display: Both of these multimeters have the same display to offer. You will get the Trendcapture feature, dot matrix display, 50,000 counts, and many more. The display of these multimeters is one of the key selling points as it is a very good one.
- Safety rating: Both these multimeters have a CAT IV safety rating of 600V and a CAT III rating of 1000V. CAT IV safety rating is considered the highest safety rating among the experts. So both the multimeters are very much safe to work with.
- Functionality: Both Fluke 287 and Fluke 289 can perform all the functions a premium multimeter is meant to perform. They can measure AC and DC volts, AC and DC currents, temperature, frequency, capacitance, and resistance. That means you can measure pretty much everything with these multimeters.
- Temperature: As mentioned in the functionality section, both of these multimeters can measure temperature by default. That is why you won’t need a separate device to measure temperature.
- Maximum Frequency: Both the multimeters have a maximum frequency of 1 MHZ. Isn’t it amazing? Yes, we think so.
- Battery Type: Fluke 287 and 289, both of them use AA batteries to power them.
Dissimilarities
- Low pass filter: It is one of the major differences between these two premium multimeters. Fluke 289 has a low pass filter to help you with getting accurate readings by blocking voltage. But in Fluke 287, this feature is not available. Is it a deal-breaker? Well, maybe not. Let’s look at the other factors.
- Low Ohm measurement: Fluke 287 can’t measure low ohm. But Fluke 289 can. It can measure Ohms lower than 50. So, it is another advantage of having Fluke 289.
- Measuring Motor Drive: Fluke 287 is not able to measure motor drive (ASD). On the other hand, Fluke 289 can do this. Thus it is yet another advantage of having Fluke 289.
- Low impedance: Fluke 289 is more accurate as it has another accuracy-friendly feature. With this feature, you can eliminate ghost voltages. For this reason, you will be able to get more accurate readings.
- Storage: The storage type of these multimeters is also different. While Fluke 287 uses Hard Drive as its storage, Fluke 289 has internal memory as storage.
- Price: The price is also different. Well, it is the most natural difference. Because Fluke 289 comes with some additional features along with the same features that Fluke 287 gives. So, it is very common that Fluke 289 will be pricier than Fluke 287. You have to pay an extra 100$ if you are intending to buy Fluke 289.
Fluke 287 vs 289 Multimeter :Which one to choose
So, which one are you going to buy? Oh, we were meant to say that for you. We would always recommend going for Fluke 289. It comes with some great additional features like low impedance and a low pass filter. In addition, you will also be able to measure low ohms with Fluke 289. And all the features of Fluke 287 are always available for you. Thus, we think paying some extra bucks is always worth it.
We are just presenting the winner in the comparison. It does not mean Fluke 287 is a bad or average multimeter in any way. It is one of the best multimeters Fluke has ever produced. It also has a great reputation among the users. So, if you are okay with the features, going for Fluke 287 is never a bad option.
You can also check out the difference between Fluke 289 vs 87V because 87V is not the same league as your 289 and the Fluke 289 is a step up from the 87V (87-5). Comparison Summary of Fluke 179 vs 87v Digital Multimeters. Fluke 323 VS. 324 Review for Multimeter Comparisons. Here is Fluke 287 Vs. 289 True RMS Multimeter Comparisons.
Can you test a purge valve? Yes, with a multimeter, you can measure the resistance of the purge valve.
Fluke 289 manual: User Manual – Fluke Corporation
Fluke 287 manual: Fluke Corporation Fluke 287 Multimeter Manual – Fluke-Direct
FAQs
Is it worth buying a fluke multimeter?
In short, yes. Fluke is the most renowned brand out there when it comes to multimeters. These multimeters are very reliable to give you the best performance with top-notch accuracy.
Why is the fluke multimeter so expensive?
There are various reasons for the expensiveness of Fluke multimeters. The first among them is safety. Fluke multimeters are very safe to work with and almost all of them are CAT IV rated which is the highest safety rating a worker expects.
How long will a fluke multimeter last?
Well, it depends. If you do not abuse it, chances are the multimeter will last indefinitely. You have to change the batteries from time to time though. In case of any inconvenience, the limited lifetime warranty will cover you.
Is Fluke made in China?
No. The manufacturing centers of Fluke are situated in the USA, the UK, the Netherlands, and in Asia. Though Asia also covers China, China is not the main and sole manufacturing country. Some of the multimeters are made in china to cope up with the cheap markets. But you can’t just say that Fluke is made in China.
Is your CDI Box Troubleshooting then test the side that comes from the stator rather than the side heading to the CDI box
Which of the two Fluke multimeters is superior to the other?
Paying extra money is always a pain. It also remains true here. You have to push your brain very hard to go for Fluke 289. But if you ask for our suggestion, spending extra here is totally worth it as you don’t have to worry about longevity. Because it’s Fluke’s product!
Note:
Fluke multimeters are one of the best multimeters in the USA and around the whole world. They are popular and premium at the same time. You don’t get to see many of these types of products out there. Fluke 287 and 289 are both top-rated multimeters from Fluke.
As they are from the same series and same manufacturer, it is quite hard to choose between these two. And the features of both these multimeters are kind of the same. Thus it makes it even harder for you to decide. Don’t worry. Now you are in safe hands. In this article, we are going to show which one is the best option for you and why. Stay tuned.
Fluke 115 Review
