Fluke 179 vs 87v Digital Multimeters

Fluke 179 vs 87v: Which fluke multimeter worth the money?

Getting quality products from a thousand ones is always a tough job to do, undoubtedly. Concerning multimeters, Fluke 179, and Fluke 87V are strong competitors compared to other multimeters in the market.

What do they come with? Fluke digital multimeters are built in all the features to tackle any shock. These meters are ready to give what you want. Both Fluke 179 and fluke 87-V are capable of 6000 count displays, ensuring clear backlight. Besides this, the measuring current is up to 1000 v AC/DC. Both models are capable of features like capacitance, diode test, etc.

Why are the differences between Fluke 179 and Fluke 87 -5? Following the differences, the measurements of current flow and accuracy are not the same. On the Fluke 179 multimeters, it is up to 20 A while on Fluke 87-v, it is only 10 A. Some other features such as display, resolution mode, peak hold function, overvoltage protection vary in the two models, which are going to be discussed further in the review portion.

To make you wise about Fluke 179 vs. Fluke 87-v, we are here with the fluke 179 vs. Fluke 87 v review.

Fluke 179 vs. Fluke 87-v Difference Table

Fluke 179 and 87-V multimeters have both similar and different features. The features are of many, and so all the comparisons are put here into a table.  This comparison will help one to understand better at once. Similarities and differences between the fluke 179  and fluke 87  are given here.

Features

   Fluke 179

   Fluke 87V

Application

Field service,Home use

Industrial

Display Counts

6000

6000 but  20000 in higher resolution mode

Display Digits

3-3/4

3-½

4-½ in higher resolution

AC/DC Voltage

1000 v

Up to 1000V

AC/DC Amps

20 A

 10A

Capacitance

Yes

Yes

Capacitance value

1nF (1000pF)

10pF

Temperature

Yes

Yes

Maximum temperature

752F (400C)

1994F (1090C)

Safety Rating

CAt III 1000V

CAT IV 600TV

CAT III 1000V

CAT IV 600V

Diode Test

Yes

Yes

Peak Hold

No

Yes

Low Pass Filter

No

Yes

Long battery life

No

Yes

Relative Reference Button

No

Yes

Duty cycle

No

Yes

Warranty

Lifetime(Limited)

lifetime(Limited)

Dc voltage accuracy

0.09%

0.05%

Price

For the price of the digital multimeter fluke 179, Check here

For the price of the digital multimeter fluke 179, Check here

Fluke 179 vs. 87-V Review

Fluke Multimeter 179 Review

Fluke 179 multimeter with backlight

Fluke 179 is an excellent multimeter with enhanced features and the ability to troubleshoot any apparatus or equipment. Being an actual RMS multimeter, Fluke 179 ensures correct AC voltage and accuracy.

Fluke 179 ESFP has a system of recording average, minimum and maximum values. All of the above, it has an integrated holster for protection.

 

For light use, fluke 179 is the best multimeter. Last for long, and battery life is very good.

If you click this link and make a purchase, we earn a commission at no additional cost to you.

Features of 179 Fluke Multimeter

  • Dimensions: The dimensions of fluke 179 are 3 cm x 9.0 cm x 18.5 cm.
  • Application field: Fluke 179 is used in field service to meet any requirement.
  • Display counts: this multimeter has an excellent collection of 6000, which is better than any other multimeter.
  • Display digits: The display digit is 3.75 of the Fluke 179 with backlight to ease the visual in any environment.
  • Capacitance: Yes, Fluke 179 has capacitance. The capacitance is 1nF in value.
  • Safety rating: The safety rating of Fluke 179 is CAT III 1000 v and CAT IV 600 TV.
  • AC/DC voltage: The meter is capable of 1000 volt Ac Current.
  • Current flow: Maximum 20A current can flow through the meter.
  • Battery: It has a 9V battery built-in, and this gives a good performance.
  • Accuracy: The DC voltage accuracy of Fluke 179 is 0.09%.
  • Temperature: The Fluke 179 can handle an environment of 400°c.
  • Peak hold: No, the Fluke 179 has no peak hold.
  • Test: It does not give a diode test and has no low pass filter. So it will make a little bit of noise.
  • Warranty: It has a lifetime warranty that ensures the longevity of performance life.

Fluke 87 V Digital Multimeter

Fluke 87 V or Fluke 87 5 is mostly known among all other multimeters. The Fluke 87 V vs. Fluke 179 has been discussed many more times before. However, it has some special features of the diode test, peak hold, low pass filter, and fantastic battery life. The further features are enlightened here.

Fluke 87-V has a dual display and is free from the outpouring of battery power and is designed for the industrial field.

If you click this link and make a purchase, we earn a commission at no additional cost to you.

Features of Fluke Multimeter 87v

  • Dimensions: The dimension of fluke 87-5 is 201 x 98 x 52 mm.
  • Application field: Fluke 87 V is used for industrial purposes to meet any requirement.
  • Display coun: this multimeter has an excellent display of 6000 and 20000 in the upgrader versions.
  • Display digit: The display digit is 3.5. But in higher resolution of fluke 179, they support display digit of 4.5
  • Capacitance: Fluke 87 V has a capacitance of 10pF, which is a good feature of this multimeter.
  • Safety rating: The safety rating of Fluke 87V is CAT III 1000V and CAT IV 600V.
  • AC/DC voltage: Fluke 87 -5 has a standard voltage supporting up to 1000 v.
  • Current flow: 10 A current can pass through the Fluke 87 V.
  • Battery: fluke multimeter 87 has a longer battery life than the Fluke 179.
  • Accuracy: The DC voltage accuracy of Fluke 87 -5 is 0.05%.
  • Temperature: The operating temperature of the battery is 1994°F
  • Peak hold: Yes, it has a peak hold.
  • Test: This digital Fluke 87 -5 multimeter can give the test of the best approach.
  • Warranty: The best part of Fluke 87 -5 is its warranty giving the assurance of a lifetime.

How do you use Fluke 87v?

What are the power-up options on MV Fluke 87-V, and how do you activate it? Fluke 87-V has many more settings that can work with Fluke 87-V  to power up. 

It is activated in one of the function buttons when the meter is turned on. To turn on automatic power, turn it on by pressing the yellow button. This will disable, so the meter will remain on. Otherwise, it automatically powers it after 30 minutes.

Another function you can enable is to smooth, hold the range key, and turn it on. This will smooth out multiple texts before the display is actually displayed. One of the other power options is the beeper. If you want to disable the beeper, hold the continuation, turn it on, and it will disable the beeper.

A function that is very useful if you want to look at your margin resistors or relative measurements if you hold the relative button and turn it on. This turns the bar graph into zoom mode. The bar graph is going to show a much wider scale. If I hit the relative, it will read the current and put the bar in the middle of the graph. If the lesson is higher, it will go this way.

If the text is low, it will go away so that you can see how a signal is changing around the initial value you took. So these are power-up options that are available on your Fluke 87-V, and as our founder john fluke said, “So these are functions that are the Fluke 87-V that you may not have to know how to take advantage of”. Source

 

How do you calibrate Fluke 87-V?

Fluke 87-V is needed to calibrate with an electric calibrator so that the multimeter gives consistent and accurate readings in any type of harsh or good environment.

Calibration method:-

Step #1:

At the first turn, the rotary handle into VAC position by holding up the Min/Max button. Hold it up till the word CAL is visible. Then release the button, and the multimeter is now on calibration.

STEP #2:

Now press the auto or hold button and enter the password. Then switch the hold button again.

STEP #3:

Now, if C-01 is visible, then attach the output of the multimeter to the electronic calibrator. After that, the dial on the calibrator to the position of “C-O1” mentioned in the manual and switch the hold button.

STEP #4

Now, after visible of the “C-02” display, the dial on regarding the corresponding position of manual and press hold. Repeat the process up to “C-31″.When the process is done,” END” will be seen. Then pressing the hold button completes your calibration.

If you face any problem, contact any professional to calibrate.

 

How do you check a capacitor with Fluke 87?

  1. Use the Fluke 87 -V digital multimeter to set the AC voltage. If used in a DC circuit, set the DMM to measure the DC voltage.

Take a good look at the capacitor. Replace the capacitor if there is a problem.

  1. Take a good look at the capacitor. Replace the capacitor if there is a problem.
  2. Select the dial-in capacitor measurement mode and it will show a spot on the dial from another function. In addition to dial adjustment, a function button is pressed to activate the measurement.
  3. In order for accurate measurement to come, it is important to keep the capacitor away from the circuit.

 

In the test connected capacitor has to be taken towards the terminal. Hold the test leads for a few seconds to automatically select the range of the multimeter.

 

How do you check the voltage on a fluke 87?

  1. Select the dial v~ to include some digital multimeters also include M. If the voltage in the circuit is not known, select the range for maximum voltage setting and select v~.
  2. The first little jack will be in the black lead in Jack.
  3. Then you have to put red lead inside the red lead. Move the leads in reverse order: red first, then black.
  4. The test indicates Blacklead, then red.
  5. Measure the display. First, the ref lead, then the black lead, must be removed.

What is the difference between the Fluke 179 and Fluke 87-V?

Though there are so many similarities, there are some differences too. Coming to the weight point, the fluke 87 -5  weighs more than the fluke 179. The weight of fluke 87 V is 2 pounds, whereas fluke 179 weighs 1.7 pounds. Now moving to other different features, Fluke 179  has a magnetic hanger ensuring hands-free conduction.

There are some other beneficial features also such as long-lasting battery life, the capacity of handling any critical environment, thermocouple probe, holster, and the test leads. These features are mentioned here because, for Fluke 87-V, these things have to be bought separately.

So Fluke 179  has a plus point in this regard. However, there are some complaints about Fluke 179 that it is made of plastic and may cause some trouble of being flimsy.

It’s time to focus on fluke 87 meter. This multimeter has accurate temperatures, whether it’s cold or hot. But it may suffer from cell phone interference, and the Fluke 179 ESFP does not. On the other hand, the fluke 87-v has a dual display and is free from the outpouring of battery power.

Another point is to be noted that it is designed for the industrial field and so it is not that much flexible for the small working sectors.

As Fluke 87-V is designed for the industrial sector, it has developed features compared to the Fluke 179. For example, it gives the diode test.  fluke true RMS multimeter 87 has a low pass filter which filters noise and gives a clear sound. Besides this, it has a longer battery life than the Fluke 179. Moreover, it has a duty cycle and peak hold, which the fluke 179  does not have.

Both products are marvelous and long-lasting. The customers who want lighter and flexible multimeters can go for Fluke ESFP. The ones who do heavy use must go for Fluke 87-V.

What is the best fluke meter?

  • Fluke 179 It uses accurate and high-quality functions. On the other hand, Accurate results of frequency readings are available in Fluke 87 v.
  • Fluke 179 has a lifetime warranty, and the Fluke 87-V also has a lifetime warranty.
  • Fluke 179 has some accessories built-in, but in the case of fluke 87-v, some parts need to be bought additionally.
  • The Fluke 179 has a good display for displaying results. The Fluke 87 -5 has a dual display.
  • A model made in the United States is the Fluke 179. On the other hand, manual and auto readings can be done very easily on Fluke 87-V.

For light use, fluke 179 is the best multimeter. So for your personal use, this multimeter is recommended. For the heavy and industrial purposes, you must go for Fluke 87-V.

 

Some other comparisons of fluke multimeters in brief

People sometimes get confused over some multimeters of fluke series. We have put them in short for your better and easy understanding of multimeters.

  1. Fluke 179 Vs. 117
  2. Fluke 87 vs 87-v
  3. Fluke 87v Vs. 117
  4. Fluke 116 vs. Fluke 179
  5. Fluke 28ii vs. 87v
  6. Fluke 177 vs. 87v

Fluke 179 Vs. 117

In the discussion of fluke 179 vs. 117, fluke 179 is the winner. At some points, they are alike. The built-in feature is more developed in fluke 179. Though fluke 179 is costly, it gives more accurate measurements. Besides this, there are difficulties in reading the screen. Fluke 179 does not have that problem and has been served with longevity and excellence. In a nutshell, costing extra money for 179  than the 117 won’t go vain.

Fluke 87 vs 87-v

The old version of fluke 87 lacks some features that fluke 87-V renders. Though both of them are identical, fluke 87 V has been made for an extreme environment. The accuracy of fluke 87 is 0.1%, and 87-V’s is .05%. Moreover, the Fluke 87 has a green backlight, and the multimetro fluke 87v has a white backlight.

Fluke 87v Vs. 117

These two multimeters differ from each other. Fluke 87V has a dual-screen, but Fluke 179 does not have. Despite these, fluke model 87 V has peak hold capacity and low pass filter, but the fluke 117 does not have. The fluke 87 V is also missing some features that are built-in fluke 117. For example, fluke 117 has a voltAlert system. It ensures no contact voltage detection and LoZ ghost voltage detection.

Fluke 116 vs. Fluke 179

The fluke 179 and fluke 116 have capacities in the same area of application field, temperature, capacitance, and diode test But the fluke 116 has LoZ ghost voltage detection. The fluke 179 does not have. Besides this, the maximum voltage capacity of fluke 116 is 600 v whereas the other one is 1000 V. Moreover, fluke 179 has a lifetime warranty, and the fluke 116 does not have.

Fluke 28ii vs. 87v

Fluke 28 ii is the upgrade version of fluke 87 V. It has built-in features as same as 87-V. But the lifetime warranty of the batteries is different. Fluke 28 ii has a longer lifespan than the 87-V. Fluke 28 ii is more costly than the fluke 87 v.

Fluke 177 vs. 87v

Fluke 177 is a product of the popular fluke 170 series. With a 6000 display count, it is drop tested to 1 meter. The battery life is also good, giving a guarantee of a lifetime. It is used for field service.

Fluke 87-5 is used for industrial applications and can give up to 20000 display count in higher resolution. Besides this, it is dust proved and a better service provider. Fluke 87-V also has a low pass filter to prevent noise and do measurements accurately.

FAQ On Fluke 87 vs 179

Which Fluke Multimeter is best for automotive use?

For automotive use, everyone chooses Fluke 77-4 as the best one. It is used as an automotive multimeter widely. This multimeter belongs to the Fluke 70 series and renders a lot of measurement services. So you can go for Fluke 77-4 for automotive use.

What is the best multimeter for the money?

The fluke multimeters are always worth your money undoubtedly. These following multimeters, you can buy for the money. ● Fluke 179 – V Digital Multimeter. ● Fluke 87 – V Digital Multimeter. ● Fluke 323 True RMS Clamp Meter. ● Fluke 179 – V Digital Multimeter.

Does Fluke 116 Measure amps?

Fluke 116 is easy to operate and enjoy both the professionals and trainees. The Fluke 116 can measure microamps of 600.

What are the best capacitor testers?

There are so many capacitor testers in the market. These are a few I chose for your assistance. ● Fluke 117 ● Etekcity MSR – A600 ● Excelvan M6013 ● Elenco CM1555 ● Honeytek A6013L

 

Conclusion

In a nutshell, the fluke multimeters are worth money in every sense. They last for long, and battery life is very good. Henceforth, there are so many similarities between Fluke 179 and fluke 87 -5. The differences are not a few. These differences made these two products variably valued multimeters. Before buying a multimeter, be sure of your purpose.

As I mentioned before, choose fluke 179 as a lighter option and 87-V as the heavier. If you have any confusion regarding the multimeters, you can go through Fluke 179 vs Fluke 87 V review article and buy one without hesitation.

Default image
Dencan Brain
I, Dencan Brain BOŽIDAR, call myself a Torque master. I've always been fascinated with cars and tools accessories. You can call me gearheads or petrolheads. I recently started a blog about welding gear.I am also a DIY welding enthusiast because it is affordable for any household work. Follow me on Facebook, Twitter, Instagram, LinkedIn and tumblr.

Leave a Reply