Changing your car’s bolt pattern can be a costly and time-consuming task, but it’s definitely worth it if you want to improve your car’s performance.
This article will outline the Chevy 8 lug bolt pattern change and explain why it’s such a popular modification. We’ll also provide:
- A step-by-step guide on how to make the change yourself to get the most out of your new car
- Some handy tips on keeping your new bolt pattern in good condition for years to come.
- Buying guide for our favorite wheels for the chevy 8 lug bolt pattern change
What Is Chevy 8 Lug Bolt Pattern?
The Chevy 8 lug bolt pattern is standard for use on the 8×6.5″ bolt patterned wheels. This pattern consists of 8 lugs on the front and 6 lugs on the rear.
Most domestic trucks have this bolt pattern, but other bolt patterns are available now for trucks like the Toyota Tacoma and Nissan Titan.
What Year Did Chevy Change The 8 Lug Bolt Pattern?
Yes, GM did change over to a larger bolt pattern in 2011, and along with that, they changed the wheels to have more offset and changed the inter-axle shafts and brakes.
Dodge still uses an 8 lug, but it will not accept GM wheels and vice versa. I know they will not fit unless you use wheel spacers.
The 8-lug GM rims up to and including 2010 will fit, but the largest you can get there are 17’s, as well as dodge rims right up to now will fit.
What Bolt Pattern Is Chevy 5 Lug?
5×4.75″ (5×120.7mm) is the lug pattern for a chevy 5 lug wheel. This is a Chevrolet S-10 pickup and has been given the name “GEN 1”.
The year ranges that these wheels were produced are 1982 through 1993. This is a very popular wheel style and is easily found at most tire shops that carry aftermarket wheels.
Ford 8 Lug Bolt Pattern
The Ford 8 lug bolt pattern is a popular option for trucks and SUVs. This pattern is 17×10″ in size and is used on vehicles such as the Ford F-150, Ford Expedition, and the Ford Bronco.
This pattern is a standard size that is commonly used on many trucks and SUVs. Bolt patterns are the openings in your vehicle’s wheel or tire through which a lug bolt is inserted.
The size of these holes is measured in millimeters, and it just so happens that sometimes they may vary in size depending on the vehicle.
Chevy 8 Lug Bolt Pattern Vs For
The Chevy 8 lug bolt pattern is standard for use on the 8×6.5″ bolt patterned wheels. This pattern consists of 8 lugs on the front and 6 lugs on the rear.
Most domestic trucks have this bolt pattern, but other bolt patterns are available now for trucks like the Toyota Tacoma and Nissan Titan.
The Ford 8 lug bolt pattern is a popular option for trucks and SUVs. This pattern is 17×10″ in size and is used on vehicles such as the Ford F-150, Ford Expedition, and the Ford Bronco. This pattern is a standard size that is commonly used on many trucks and SUVs.
What year did Ford change their 8 lug pattern?
Ford changed from a 7-Lug to an 8-Lug pattern in 1999. The change was mainly due to Ford switching the position of the lug nuts to provide better tire coverage and compliance with the NHSTA.
Is Ford 8 lug the same as Chevy?
All of the 8-lug rims on Ford pickups are identical. From 1967 to 2009, they are the same bolt pattern, with the exception of a few Super Duty trucks (03-08) that have larger hubs, all-around 8-lug F150, Super Duty, and Bronco rims will fit.
Will Chevy and Ford 8 lug wheels interchange?
This is a difficult question to answer, as the wheel sizes on different models of cars can vary. It is important to contact an automotive technician in order to confirm which wheels will fit on which car.
Will A 8×6 5 Fit 8×170?
The Set of 4 Hub Centric Wheel Adapters purchased will convert 8 lug 6.5-inch (165.1mm) hub bolt patterns to fit bolt pattern wheels of 8×170.
These adapters are machined to OE dimensions and are 6061 billet aluminum with the correct offset and backspacing, designed to fool the hub into thinking the wheel is its original size on your vehicle.
The adapter set will also provide space your wheels by 1.5 inches to assist you get sufficient space for broderies and tires.
Chevy 2500 8 Lug Bolt Pattern
The Chevrolet Silverado 2500HD has a bolt pattern of 8x180mm, making it compatible with wheels that have eight lugs and are spaced 180mm apart.
These trucks also have a centre bore of 124.1mm and lug nuts with a thread size of M14 x 1.5 that must be tightened with 140 lb-ft (190Nm) of force.
The Chevrolet Silverado 2500HD was produced between 2011 – and 2019 and is currently in its fourth generation. It is a versatile bolt pattern that can be used to secure both the body and the wheels of your Chevy 2500 8 lug truck.
When Did Gm Change Their 8 Lug Bolt Pattern?
GM has changed the bolt pattern for their 8 lug wheels. The new standard for GM and General Motors trucks is a 7 x 5 bolt pattern.
This change happened in 2011 and was instated in order to bring their standard up to date with some of the other OEM companies.
If you have a 2007 or older truck that still has an 8 lug wheel, you are going to want to replace the wheel before installing a new tire on it so that you do not get extra wear and tear on your vehicle.
Are All Chevy 8 Lug Patterns the Same?
The lug pattern on a wheel refers to the spacing of the holes around the wheel. This spacing is determined by the number of lugs or bolt holes on the wheel.
The 8-lug pattern is one of the most common patterns and has eight equally spaced bolt holes in 5- or 6-hole designs. Most wheels for classic and vintage vehicles share the same eight-lug pattern.
Chevy trucks came with 8 lug wheels until 1996, although they were hub-centric in newer models. A hub-centered wheel has a different lug pattern that won’t fit over a hub because it protrudes into the wheel’s center bore.
As an example, Ford 8 lug wheels that are vintage 1992-96 fit over a Ford hub but not a Chevy hub. Astonishingly, they are interchangeable but not interchangeable with Chevy trucks designated as pre-93 or newer.
When Did GM Switch 8×180?
In 2011, GM began to test a new 8×180 vehicle platform that would ultimately lead to the launch of the Chevrolet Volt in 2010.
The 8×180 platform was developed to improve fuel efficiency and durability while meeting stringent emissions and safety standards. The 8×180 platform was also the foundation for the Chevrolet Cruse and Buick Lacrosse.
What Is the Bolt Pattern on A Chevy 8 Lug?
The bolt pattern on your Chevy truck is 8-165. The center hole you’d use to mount a hub is the same size as the lug nuts, which are 6.5 inches in diameter.
A hub manufactured for this specification might vary slightly in the way it fits a different car, but if you have one of these patterns, there’s no chance of getting an inappropriate piece of hardware stuck onto vacuum lines or other critical points on the vehicle.
Can You Change A Bolt Pattern?
If you need to change the bolt pattern of a hub, you can easily modify it yourself. It only involves removing the centerpiece of the hub and replacing it with a new one that has the appropriate bolt pattern cut into it.
Then, the new piece goes back on with its set screws into the same place where the original centerpiece went. The kit comes complete with all components needed for this job: new pieces for each corner of the hub; set screws that are identical to those in your existing hub; and Allen keys to tighten them with.
Will 8 Lug Chevy Rims Fit 8 Lug Ford?
Not all Chevy 8 lug wheels will fit. There are two different bolt patterns. You need to have a wheel that has the correct bolt pattern for your truck.
If you get a wheel that won’t fit, you can change hubs to one that has the bolt pattern you need. The part number on the back of your hub is NV231C or NV241C.
It is a non-serviceable unit and would require pulling your axle for replacement. Ford and Dodge rims will fit on Chevy, International, and Jeep.
Chevy OEM 8 lug rims won’t fit on Fords or Dodge because their hole for the hub is too small. Both Ford and Dodge 8 lug wheels index on the hub, not the lug nut studs. Chevy wheels index on the studs.
Are Ford and Chevy Bolt Patterns the Same?
Ford and Chevy use different patterns on their wheels, but the two rim designs have the same bolt pattern. With a similar lug size, you will be able to utilize a replacement wheel on your Chevy by purchasing it from other vehicles that may fit your vehicles, such as GMC, Cadillac or Buick.
Do Chevy and Ford Trucks Have the Same Bolt Pattern?
The wheels of most mid-size trucks are constructed in a similar way, but there is a difference, as Chevys and Fords often have different bolt patterns.
When installing Chevy wheels on a Ford, adapters should be used to give the wheels proper depth alignments. After purchasing black Chevy truck rims and installing them on your ride, you will not only add a touch of exclusivity to it but also make it more comfortable to drive.
Buying Guide: Best Wheels for Chevy 8 Lug Bolt Pattern Change
Now that you understand what the Chevy 8 Lug Bolt Pattern change is all about, you might be wondering — what should I do next? Based on the patterns, some of you will not need to purchase new wheels. However, for others — if the new pattern is different from the old one, then you will need to buy compatible wheels for the Chevy 8 Lug Bolt Pattern change.
For others, you might just want to give your wheels a nice polished finish to upgrade your truck. Here’s our editor’s choice and top pick for wheels which are in sync with the Chevy 8 Lug Bolt pattern change.
The 16-inch polished replica 8 lug wheels for Chevy 2500 and 3500 HD trucks are a must-have for truck owners who demand style and performance. The high-quality aluminum construction of these wheels ensures durability and longevity. The machining and polishing process used to create these wheels is second to none, resulting in a brilliant, chrome-like appearance that will turn heads wherever you go.
When it comes to tires, the MXT wheels are the ideal choice for light truck owners and extreme off-road enthusiasts. This mud-terrain tire is designed for maximum off-road traction and handling on the highway. The MXT features a striking “side biter” design and wide, deep tread grooves that provide superior performance in mud and snow. This tire is rated Load Ply E, making it an excellent choice for your 2500 and 3500 hauling needs.
Installing these wheels and tires on your Chevy 2500 or 3500 HD truck will offer several benefits. Firstly, the high-polished aluminum finish will enhance the appearance of your truck, giving it a sleek, stylish look. Secondly, the MXT tires will provide improved traction and handling, especially in off-road conditions, giving you more confidence when driving on rough terrain. Finally, the 8 lug bolt design of these wheels ensures a perfect fit for your truck, so you can be assured of a safe and secure installation.
In conclusion, if you’re looking to upgrade the appearance and performance of your Chevy 2500 or 3500 HD truck, these 16-inch polished replica 8 lug wheels with Courser MXT tires are the perfect choice. They offer style, durability, and improved off-road capabilities, making them an excellent investment for any truck owner.
Supported vehicles:
- Bolt pattern: 8-6.5″ or 8×165.1mm, Hollander #5079
- Fits 2001-2010 Chevy Silverado 2500, 3500,
- 1997-2017 Express Van 2500, 3500
- 1989-2013 Suburban 2500
- 2001-2010 GMC Sierra 2500, 3500
- 1997-2017 Savana Van 2500, 3500
- 2000-2013 Yukon 2500
Conclusion
In this blog, we discussed the Chevy 8 lug bolt pattern change and how it affects Chevy 5 lug bolt patterns. We also explained when GM changed their 8 lug bolt pattern and if all Chevy 8 lug patterns are the same.
We also gave you an answer to whether all Ford trucks have the same bolt pattern as a Chevy 8 lug and answered a question about whether Chevy rims will fit on Ford trucks with a different bolt pattern.
