P0013 Chevy Malibu Code

What Does Trouble Code P0013 Mean?

It’s one of those generic powertrain codes that can apply to any vehicle equipped with OBD-II. In short, P0013 means that the engine’s camshaft position sensor (CMP)/ camshaft position actuator circuit has gone bad.

The CMP sensor is used by the engine control module (ECM) to synchronize the firing of the cylinders.

If you’re like most people, you probably freak out a little when your check engine light comes on. But what does it really mean when you see the dreaded P0013 code? P0013 is a relatively common trouble code.

So, when it goes bad, the ECM can’t do its job properly and your car will run into all sorts of problems. The good news is that P0013 is usually pretty easy to fix.

In most cases, all you need to do is replace the CMP sensor. But in some rare cases, you may also need to replace the ECM itself.

Code Error P0013 Chevy Malibu Cause

Code Error P0013 Chevy Malibu Cause

The ocv regulates the flow of oil in and out of your engine’s valves. If it malfunctions, it can result in a P0013 trouble code being displayed on your instrument cluster.

A faulty ocv can also cause a P0013 trouble code and will require replacement to fix this problem. This can be costly if you don’t have one on hand, so it’s important to know how an ocv works and what causes them to malfunction before you try replacing it yourself.

Also Read: How to clear p0420 code

How Do I Fix Error Code P0013?

How Do I Fix Error Code P0013?

If you’re getting the P0013 code, it means that the camshaft position (CMP) actuator solenoid for bank 1 exhaust is stuck in the advanced position.

This can be caused by a few different things, but most likely it’s either because of a dirty or failed oil control valve (OCV) or a problem with the CMP itself. To fix this, you’ll first want to clean out the OCV if it’s dirty.

You can do this by removing it and soaking it in some solvent overnight. If that doesn’t work, then you’ll need to replace the OCV.

If the OCV is clean or has been replaced and you’re still getting the P0013 code, then there may be an issue with the CMP itself. In this case, you’ll need to replace the CMP.

When this code is set, the engine will run and idle normally, but it will not start. If you are able to start the engine and drive it around, but not start up in the morning and have to turn it off, there may be a problem with the ocv sensor or its wiring.

Check all grounds for cleanliness as well as any corrosion or loose connections. Make sure that there are no loose wires or damaged connectors that could cause an electrical short between two grounds and result in this fault code being set.

If you have replaced any parts related to this fault code, reset your check engine light with a scan tool after replacing these parts so they can be properly tested before re-inspection of your vehicle’s systems.

Also Read: Evaporative Emission Control System

Can I Drive With Code P0013?

Can I Drive With Code P0013?

This is a difficult question to answer without knowing more about your particular situation. Code P0013 typically indicates an issue with the camshaft position sensor or the timing chain/belt on your vehicle.

If your car is still under warranty, it’s best to take it to a dealership for diagnosis and repair. If you’re comfortable working on cars yourself, you can check the wiring harness and connector for the camshaft position sensor for any loose, broken, or damaged wires.

You can also try cleaning the sensor itself with brake cleaner or electrical contact cleaner. If neither of those solutions work, then you’ll likely need to replace the sensor.

As far as driving goes, if code P0013 is displaying on your dashboard then it’s probably not safe to drive until the issue has been resolved.

P0013 Chevy Malibu Symptoms

If your Chevy Malibu is experiencing any of the following symptoms, it may have a P0013 code:

  • The check engine light is on.
  • The engine is idling roughly.
  • There is decreased power when accelerating.
  • The engine stalls frequently.

These are all common symptoms of a P0013 code, and can be caused by a number of different issues.

The most common cause is a faulty camshaft position sensor, but other potential causes include an oil leak, dirty oil, or loose timing chain.

Read More About: P0455 Code Chevy

Can Low Oil Cause P0013?

Can Low Oil Cause P0013?

Yes, low oil can cause the P0013 code to trigger. This code is typically associated with a oil pressure sensor issue, but it can also be caused by low oil levels.

If your vehicle is low on oil, it may not have enough pressure to properly operate the engine, which can cause the P0013 code to trigger.

P0013 Chevy Malibu 2013

If your Chevy Malibu 2013 has the P0013 code, it means that the engine is having trouble with the variable valve timing (VVT) system.

This can be caused by a few different things, but most likely it’s due to an issue with the oil control solenoid or the timing chain. The oil control solenoid is responsible for regulating the flow of oil to the VVT system.

If there is an issue with this solenoid, it can cause the VVT system to malfunction. The timing chain is another potential cause of this code. If the chain is stretched or damaged, it can cause problems with the VVT system.

In most cases, you’ll need to have your vehicle checked out by a mechanic in order to diagnose and fix this problem.

They’ll be able to test both the oil control solenoid and the timing chain to see which one is causing the issue.

P0013 Chevy Malibu 2012

P0013 Chevy Malibu 2012

If you’re the owner of a Chevy Malibu from the 2012 model year, then you may have noticed the check engine light coming on intermittently.

This is most likely due to an issue with the vehicle’s Variable Valve Timing (VVT) system. The VVT system is responsible for ensuring that the engine’s valves open and close at the correct times, in order to improve performance and fuel efficiency.

Unfortunately, it seems that there are quite a few 2012 Chevy Malibus out there with faulty VVT systems. In fact, Chevrolet has issued a recall for over 50,000 of these vehicles.

If your Malibu is affected by this recall, then you’ll need to take it to a dealer so they can replace the VVT solenoid.

In the meantime, if you’re noticing your check engine light coming on intermittently, try resetting it by disconnecting and reconnecting your battery terminals. This may give you some temporary relief until you can get your car fixed.

Also Check: Powertrain Control Module Reprogram For Cam Phaser Rattle

P0013 Chevy Malibu 2010

P0013 Chevy Malibu 2010

P0013 code Chevy Malibu 2010 is a great choice for a midsize sedan. It has a comfortable interior with plenty of room for five passengers.

The exterior is stylish and sleek, and the car comes standard with alloy wheels and LED daytime running lights.

The engine is powerful yet efficient, and the transmission is smooth and responsive. Overall, the Chevy Malibu 2010 is an excellent choice for anyone looking for a reliable and affordable midsize sedan.

P0013 Chevy Malibu 2014

P0013 Chevy Malibu 2014

If you own a Chevy Malibu from 2014, you may have noticed the P0013 code appearing on your dash. This is a relatively common problem that can be caused by a few different things. In most cases, it’s simply an issue with the oil pressure sensor or the wiring to it.

However, it could also be caused by a more serious problem like an oil pump failure. If you see the P0013 code pop up, don’t panic. Start by checking the oil level and making sure it’s full.

If it is, then the next step is to check the oil pressure sensor itself. Make sure that it’s clean and free of debris, as this can often cause false readings.

If everything looks good there, then you’ll need to check the wiring to the sensor for any loose connections or damaged wires.

If all of those things check out, then unfortunately it’s likely that you’re looking at a more serious issue like an oil pump failure.

This will require professional assistance to fix so take your car to a mechanic as soon as possible if this is the case.

Also Read: P00b7 Chevy Cruze

P0013 Chevy Malibu Location

P0013 Chevy Malibu Location

If you own a Chevrolet Malibu, you may have experienced the P0013 code being thrown. The P0013 code is a generic OBD-II trouble code that indicates an issue with the camshaft position actuator circuit.

This can be a result of a few different things, but most commonly it is due to a faulty camshaft position actuator solenoid or perhaps a wiring issue.

In any case, this is definitely something you’ll want to get fixed as soon as possible as it can lead to some pretty serious engine issues down the road. In order to fix the P0013 code on your Chevrolet Malibu, you’ll first need to identify the root cause of the problem. If it’s simply a matter of a faulty solenoid, then replacing it should do the trick.

However, if there is an issue with the wiring, then that will need to be addressed as well. Either way, this is something best left to a professional mechanic who has experience dealing with these sorts of issues.

Once the root cause of the P0013 code has been identified and repaired, you should be good to go and your Chevrolet Malibu should be running like new again!

P0014 Chevy Malibu

P0014 Chevy Malibu

If your Chevy Malibu is giving you trouble with the P0014 code, don’t worry – you’re not alone. This is a common problem for owners of this vehicle, and there are a few things you can do to fix it. First, let’s take a look at what the P0014 code means.

This code indicates that there is an issue with the exhaust valve timing. When the exhaust valves open too early, it causes an imbalance in the engine and can lead to decreased performance and fuel economy.

There are a few things that can cause this problem, but the most common is a failed exhaust valve timing solenoid.

If this is the case, replacing the solenoid should fix the problem. You may also need to replace the timing chain or tensioner if they are worn out or damaged.

If you’re not sure what’s causing your P0014 code, it’s best to take your car to a mechanic for diagnosis. They will be able to pinpoint the exact problem and get your car running like new again in no time!

P0013 Chevy Malibu 2011

If you own a Chevy Malibu from the 2011 model year, you may have been experiencing some strange engine behavior recently.

Specifically, your check engine light may be coming on and staying on, accompanied by a message on your dash saying “Service Engine Soon.” What’s going on?

It turns out that there is a problem with the variable valve timing solenoid in these cars, which can cause the engine to run rough and the check engine light to come on.

The good news is that Chevrolet has issued a recall for this problem, and will fix it free of charge. So if you’re having this issue, take your car to a Chevy dealer and they’ll take care of it.

Also Read About: P0456 Code

Conclusion

If you have a P0013 code, it means that one of your engine’s camshafts is stuck in the open position and won’t shut off completely.

This can lead to uneven idle, rough idling, hesitation, stalling and even engine damage if left unchecked.

The Chevy Malibu is a reliable and affordable car that is perfect for anyone looking for a new vehicle. It has a comfortable interior and plenty of features that make it a great choice for anyone in the market for a new car.

About The Author

Leave a Comment

Your email address will not be published.