The most serious problem that can occur when mounting a tire is a blowout—the tire fails to seat completely in the wheel well, causing a loss of control.
When mounting tires, it’s important to use a tire-mounting lubricant approved for your particular vehicle.
A good choice of lubricants are vegetable oil soaps and animal soaps solution. Never use antifreeze, silicones, or petroleum-based lubricants. Improper ratios of approved lubricants and water may have a harmful effect on the tire and wheel.
What is Tire Mounting Lubricant?
Tires do a lot of moving, but that doesn’t mean they’re immune from wear. Like any machine, tires need to be lubricated to work properly — this is especially true when they are mounted onto wheels.
Lubricants have the ability to reduce friction between the tire and the wheel, lowering the amount of force needed to keep them in contact with one another.
This makes tires more receptive to suspension movements and more effective at absorbing bumps in the road.
There are different types of lubes for various situations; however, most people use silicone-based products when mounting their tires. Silicone lubricants are usually clear in color and they stick well to the rubber of your tires.
Lubricants are one of the most important parts of tire maintenance, but few people know how to use them properly.
Tires need proper lubrication throughout their life, from the moment they’re mounted until the moment they’re replaced. Lubricating a new tire is a little different than lubing an old one, although you can use some of the same products.
What Lubricant Should be Used When Mounting a Tire?
Curing a puncture or a flat tire can become much easier if you use a lubricant on the affected area. The most common lubricants for mounting tires are mineral oil soaps or animal soaps solutions like dishwashing soap and dishwashing liquid.
These types of lubricants are non-toxic and usually provide decent effectiveness while being fairly inexpensive. They aren’t recommended for all types of applications, however; some states have strict regulations that restrict their use.
Tires can be a high-risk investment — especially if you drive a lot. To avoid damaging your tires, you need to use approved lubricants on them.
Like oil in your car’s engine, the rubber used in tires is an important part of the process of moving your car down the road.
Unlike oil, however, it’s not meant to be touched. The chemicals used in most rubber compounds are corrosive and can cause damage to your car if they get into the air system.
Using an approved lubricant ensures that your tire will last for years without any problems. The most common approved lubricants include those made from vegetable oils and animal soaps solutions.
There are specialty ones for specific types of vehicles, such as chain saws and lawnmowers, but most of these products are available at any auto supply store or online.
How to Make Tire Mounting Lubricant?
The first step for mounting a tire on any vehicle is to apply a very small amount of approved lubricant to the threads of the wheel and tire. This prevents metal-to-metal contact.
Mounting a tire can be a dangerous task, and many people are tempted to use inappropriate lubricants in an effort to reduce the risk of skidding.
However, proper tire mounting lubricant is essential for preventing damage to the wheel bearings, brake lining, and tire wall.
There are several types of lubricants you can use when mounting a tire. After the vehicle has been driven for a short period of time, you can use any of these to coat the inside of the axle nut (or other parts that come in contact with the wheel) with a thin film of oil or grease.
Specified lubricant mixtures have been approved by the tire industry. If you’re mounting a tire, the last thing you want is an unexpected leak.
All the weight of the tire, plus the load you’re putting on it, must be transferred to the wheel correctly and safely.
It can be difficult to find all-purpose lubricant that meets the requirements of your particular mounting system — some require soaps, others require oils — but the best practice is to use a product that has been approved for your application
What is an Approved Bead Lubricant?
There are several types of approved lubricants, which vary by vehicle manufacturer and application. Some premium tire mount lubricants contain an anti-rusting blend that helps prevent damage to the wheel and tire from road salt, while others include gentle surfactants designed to reduce friction and protect the paint finish.
Lubricants should never be used on tires that have been repaired or replaced with cheaper, non-approved materials, or with inferior grades of rubber. Doing so can result in severe damage that could affect the integrity of the tire and wheel assembly.
Best Tire Mounting Lubricant
Here are some of the commonly used lubricants for tires:
- Degreasers are chemicals that are used for cleaning various surfaces. They don’t have any lubricating properties. That’s why people often recommend using “degreasing” soap when doing heavy-duty cleaning projects like gear- and hub-swapping or removing rust from bike parts.
- Sealants are products that help to prevent dirt and other contaminants from entering into the tire from outside sources. Some sealants also include lubricant properties in their formulation, although they may not be approved for this use by the American Society of Testing and Materials (ASTM) or another relevant body.
- Best lubes for mounting tires are super-hydrophobic, which means they repel water. This helps keep your tire from getting flat in the first place, and it helps prevent corrosion from occurring when you mount your tire on your rim.
- If you want to go with a grease lube instead of a water-repellent lubricant, make sure it’s rated at least 0w-50 (specialized grease oils are rated at 10w-90) and that it’s food-grade so it won’t be harmful to use around your bike or car parts.
If you’re riding your bike or driving a car, you need to understand how the tires work and keep them well lubricated. And when it comes to tire maintenance, there’s more than one type of lubricant.
More importantly, petroleum-based lubricants can damage the rubber compound in tires and can cause the bead to crack.
Also, the petroleum-based lubricant will harden over time and get sticky. That’s why you want products that contain other substances that act as a wetting agent.
These products are water-based and are designed to dissolve quickly into the rubber compound and prevent cracks from forming. The wetting agents also help prevent any anti-freeze from getting inside your tire bead.
Is Dish Soap an Approved Bead Lubricant?
Your tires and wheels need to be kept clean in order to provide optimal performance. Proper cleaning of your wheels is critical to the longevity of your tires.
Proper tire and wheel cleaning with approved lubricants will significantly lengthen the life of your tires and wheels.
Lubricants should be used with a leaf blower or floor machine, which can reach all parts of the car. A long-handled brush or scrubbing brush may be used if needed to dislodge dirt and debris from the vehicle.
Solid soaps are not recommended for use with tires. Unlike liquid soaps, solid soaps cannot be rinsed away from the tire surface and will cause damage to the tire’s finish through corrosion.
Animal soaps are also not recommended because they may contain harsh detergents that could cause corrosion and discoloration of the tire’s finish.
Vegetable Oil for Mounting Tires
The right lubricant will reduce friction between tire and rim, allowing wheels to spin more easily and produce less heat.
Most tires have a recommended type with which they should be lubed, so pay close attention to that label when you’re buying your own tires or when you mount new ones on your vehicle.
There are several advantages provided by using a vegetable oil soap solution over other types of lubricants for tire mounting:
- They are non-corrosive and do not contain harsh acids or chemicals that can damage your rims
- They have a long shelf life
A tire mounting lubricant should be used when mounting a tire. This is to prevent having the wheel seizure, which can damage the wheel and cause the tire to fail.
What are the Things that Can Make a Good Tire Bead Lube?
When you’re mounting a tire, it helps to have the right tools. When you’ve got the right tools and equipment, you’ll spend less time screwing around and more time getting the job done.
Here are some things that make good tire bead lube:
- Petroleum jelly (Vaseline): This petroleum-based product is by far the most popular coating for tire beads. It’s easy to apply, won’t harm rubber or plastic, will not burn your hands, and can be cleaned up with warm water.
- Rubber grease: This is different from petroleum jelly in that it’s an oil-based lubricant made for metal parts — not rubber. But it can work as a sealant for rubber parts as well, if applied sparingly and properly.
- Dish soap: A few drops of dish soap in each bead will help keep them clean when you’re mounting tires on their wheels. It doesn’t harm rubber or plastic, but is corrosive to metal parts — so you shouldn’t use it on those parts either.
Whether you’re looking for a tire repair kit, air compressor, air hose or any other number of accessories and tools, you have to have the right tool for the job. Lubricant is no different. There are plenty of lubricants out there, so finding the perfect one can be tricky.
Tire Lube Alternatives
Grease will damage your wheel’s finish and do more harm than good; however, dish soap will attack the metallic parts of your wheel and damage them as well.
You can buy pre-mixed tire lube or buy cans of pure solvent-free lubricant. Some people prefer to mix their own lube rather than paying for a premixed product.
The main problem is that they contain mineral oils or petroleum distillates as their base ingredient. Mineral oil is especially bad because it’s highly susceptible to oxidation and break down.
It’s also notorious for attracting water and absorbing it into the rubber. Over time, the rubber becomes less pliable, which can lead to premature tire failure.
Thankfully, there are plenty of alternatives to mineral oil-based lubricants like liquid vegetable oils and silicone-based lubricant that don’t hold these drawbacks.
Some people like using things like anti-seize paste and anti-galling compound on the bead inside their tires because they soak up more moisture than grease does.
But these compounds are still mineral oil based, so you shouldn’t use them in your tires without some sort of extra protection just in case they get contaminated with water during a ride.
Frequently Asked Questions
1. What lubricant is the best for mounting a tire?
Motor oil or even paraffin wax as a tire mounting lubricant. This can cause problems with your wheel, such as stripping the threads on the carrier studs, bending the carrier shafts, and/or cracking of the wheel hub.
2. What is tire beads?
Tire beads are made from rubber and the only lubricant that can be used on them is silicone-based. Many people use grease for their tire bead lube, but this will not work.
It will cause the rubber to deteriorate more quickly than it should because it’s not a natural product like silicone-based lubricants.
3. Is the tire lubricant safe for tires?
The only lubricant that is safe for use on the tire bead is silicone-based. If you’re looking for a non-silicone lube you can use dish soap, but it’s best not to use this type of lube on the tire beads because you want to keep those intact as much as possible.
4. What is the best way to mount a new tire?
The best way to mount a new tire to a wheel is with the correct type of adhesive, which should be applied with the correct amount of pressure.
There are several different types of tire lube, including grease, wax, and others. Unfortunately, many people who are new to this sort of customization end up using whatever greasy substance came in the box.
5. How to grease up a tire?
There are plenty of ways to grease up a tire. The most common ones, like Vaseline petroleum jelly, may have some benefits, but they’re not particularly good for your tires.
6. Is WD-40 an approved bead lubricant?
Yes, it is an approved bead lubricant. While you can certainly use petroleum-based products like Vaseline or WD-40 to lube tires, they won’t be very effective in preventing flats.
The rubber compound in tires contains oils that are slippery, so they make great lubricants.
If you’re looking for long-lasting protection, it’s best to use wet film lubricant because it penetrates deeper into the rubber and forms an elastic layer on the surface that resists damage from abrasion.
Many people are under the impression that tire lubes only contain petroleum-based products, like mineral oil and silicone. This is not true, however.
In fact, most modern lubes contain a myriad of ingredients, including organic compounds and food-grade lubricants.