The price will depend on the make, model, and year of the vehicle, but it also depends on the type of tire that is being used. For example, if you have regular tires and rims and not custom rims, the replacement cost will be on the lower side.
Before going to the mechanic to get your TPMS sensors replaced, check with your local auto parts store first. They may sell the exact sensors you need at a much lower cost.
How much does it cost to replace a tire pressure sensor?
According to our survey of tire shops, the average cost to replace a TPMS sensor is $108 per tire sensor.
The average cost range to have a TPMS system repaired on your car is between $110 and $190.
The average cost for the part alone is about $65, with an hour of labor costing about $80.
We did find that it cost as much as $235 per tire sensor to replace.
How much is a Lexus tire sensor?
The Lexus tire pressure sensor cost is $30 to $50. The part is fairly small, so labor will likely be relatively inexpensive as well. However, some dealerships and auto shops may charge a fee to reset the sensor.
Tire pressure sensors are relatively inexpensive, with the average price range being between $20 and $50 per tire. However, this cost can increase depending on the vehicle’s make and model.
The following are some of the more common costs for tire pressure sensors:
- Lexus: $60-$80 each
- Toyota: $35-$70 each
- Honda: $60-$70 each
- Ford: $50-$90 each
- BMW: $60-$80 each
In addition to a tire sensor replacement cost, if your TPMS is broken or damaged beyond repair, you may need to replace the entire system. This may cost anywhere from about $300 to over $1,000 for parts and labor.
For example, a Lexus owner who posted a question on this site said that the dealer told him the TPMS sensor cost $57 plus $100 for installation.
On another site, a poster called a dealer was quoted $77 per sensor, with installation included. That same user called another tire shop and was told the sensors cost about $25 each. The user installed them himself.
Is it worth it to replace TPMS sensors?
Tire pressure sensors cost anywhere from $50 to $250 each, depending on the make and model of your vehicle. When you factor in the cost of labor, the total bill can climb to $400 or more.
Even if you know how to do it yourself, replacing a tire pressure sensor may not be worth it. Most TPMS systems are equipped with a light that illuminates when a tire is low on air.
When this happens, you can simply add air to the tire and reset the system with a button on the dashboard instead of replacing the sensor.
If you need to replace one or more sensors after rotating your tires, there are two things to consider:
In some cases, you can have an existing sensor reprogrammed so that it works with your new wheel setup. This will save money compared to buying new sensors.
It’s important to choose a mechanic that knows how to work with your vehicle’s TPMS system. Some mechanics will recommend replacing all four sensors at once in order to save time and money later down the road.
How much does it cost to replace a tire pressure sensor on a Toyota?
A new tire pressure monitoring system is approximately $100 per wheel. We also recommend that you consider the cost of labor to change the tire pressure monitoring system, which will vary depending on the make and model of your vehicle as well as the location where you’re having it repaired.
If your Toyota has a tire pressure monitoring system (TPMS), you’ll know if your vehicle is low on air from a warning light that pops up on the dashboard.
The TPMS alerts you when the tire pressure drops 25 percent below the manufacturer’s recommended pound per square inch (PSI) level.
While this can be a helpful safety feature, a faulty TPMS can result in either too many false alarms or no alarms at all — neither of which are good. And if it’s not working properly, you could end up with expensive repair bills if you have to replace more than just one tire.
The price of the Toyota tire pressure sensor replacement will depend on the model you have, but it could cost anywhere from $100 to $300+. Labor will be an additional charge and can cost between $75 and $100.
How much does it cost to replace a tire pressure sensor?
The TPMS (Tire Pressure Monitoring System) sensor is the only part of the TPMS that actually touches the wheel and tire.
It is installed in place of a valve stem on the wheel and monitors the pressure of that tire. Sensor antennas are built into the wheel to receive radio signals from the sensors to monitor tire pressures.
The average cost to replace a TPMS is under $100**
What is the TPMS code for Lexus disc monitoring?
If your Lexus has a Tire Pressure Monitoring System (TPMS), the light will come on when there is a problem with the system.
The most common reason for the light to come on is that one or more of your tires is at least 25 percent below the recommended pressure.
The TPMS light can also come on if you change a tire, such as replacing a flat, or even if you rotate your tires. This is because the sensors track pressure in each tire, and if you move them to different positions, the system will register it as an error.
The Lexus RX 350 has the following TPMS sensors fitted as standard:
- 42607-48060 – Rx350 (2009 – ) (Clamp in)
- 42607-48050 – Rx350 (2009 – ) (Clamp in)
- 42607-48040 – Rx350 (2009 – ) (Clamp in)
- 42607-48030 – Rx350 (2009 – ) (Clamp in)
Why does the TPMS light come on my Lexus RX 350?
Tire pressure monitoring systems are a great safety feature to have on your car. When the tire pressure is low, the system alerts you by illuminating the TPMS light on your instrument panel. Most of the time, this is caused by a faulty TPMS sensor in one of the wheels.
However, there are several reasons for TPMS lights to come on. Here are just some of them:
1. BAD TIRE SENSOR
Your car has four tires, each with its own sensor. When one of them fails, it triggers the light to come on.
2. LOW PRESSURE
If you have neglected to check your tires lately and they are running low on air pressure, the TPMS light will come on. It’s important to check your tire pressure every few weeks and keep it inflated at factory specifications.
3. BATTERY REPLACEMENT
When the battery in your vehicle is replaced, this will reset the TPMS system and cause a warning message to display. This is normal and will go away after driving a short distance.
4. TPMS RECALIBRATION
If you have recently rotated or replaced your tires, it may be necessary to recalibrate the system so that it can properly read the new pressure settings in each wheel.
How to reset the Toyota TPMS?
The Toyota Tire Pressure Monitoring System isn’t as sophisticated as some other systems. It’s not designed to tell you which tire has low pressure, only that one or more of your tires is low. The system also doesn’t reset itself, so you have to reset it after putting more air in the tires.
Open the driver’s side door and press the “Trip” button on the dash until the TPMS light comes on. After a few seconds, the light will start flashing. This indicates that the system is ready for new sensor data.
Drive around with the system in this mode for at least 5 minutes so it can learn each tire’s pressure and temperature.
If you have a tire with very low pressure, it will take longer to learn its pressure and temperature because you’ll be driving slower than normal.
Press and hold the “Trip” button again until the flashing light turns off and remains off. This resets the TPMS system back to its normal mode.
How does a tire pressure sensor work on a car?
Tire pressure monitoring systems (TPMS) are very common features in today’s cars, trucks, and SUVs. They are designed to alert you when the pressure in your tires becomes critically low, but how do they work?
There are two different types of TPMS systems: direct and indirect.
Direct TPMS uses a sensor that is installed in each wheel of the vehicle and measures the air pressure inside of each tire. There are several different types of direct TPMS sensors, some being more expensive than others.
You may find a direct TPMS system on cars made by BMW, Honda, Lincoln, Lexus, Mercedes-Benz, Nissan, Toyota, Volkswagen, among other manufacturers.
Indirect TPMS measures the speed at which your wheels rotate to determine if one tire has lost air pressure. Most newer vehicles today use this type of system because it is less expensive than a direct TPMS system.
The indirect TPMS monitors the speed of each wheel using the vehicle’s antilock braking system (ABS) wheel speed sensors.
Anytime there is a difference in rotational speed between two tires on the same axle or between two diagonally opposite tires, it is likely that one or more tires have lost air pressure.
TPMS sensors are found on the wheels of most new cars, and they can warn you when one or more of your tires is underinflated.
According to the National Highway Traffic Safety Administration, most vehicles beginning with the 2008 model years include a TPMS.
Most car owners have come across a notice that says “Low Tire Pressure,” especially on cold mornings. The light indicates that one or more of your tires is low on air.
Many new vehicles are equipped with tire pressure monitoring systems (TPMS) that alert a driver when one or more tires are low on air.
TPMS sensors monitor the air pressure in your tires and send a signal to your vehicle’s computer when the air pressure drops to an unsafe level.
Tire pressure sensors are mounted on the inside of each tire and wheel assembly behind the tire valve stem.
Frequently Asked Questions
1. How do I reset my Lexus TPMS?
1) Press and hold the “Trip Meter” reset stem until “Tire Pressure Monitoring System” appears on the dash display, then release the stem.
2) Press and hold the “Trip Meter” reset stem again and hold for about 10 seconds until “Set Sensor ID Complete” appears on the dash display and a horn sound is heard.
3) Turn ignition off then on again to confirm ECU reset is complete. The yellow warning light should go out until a low tire condition exists.
2. How do you program a TPMS sensor on a Lexus?
Start by turning your vehicle off and then turn it back on again. This will cause all four tire pressure lights to blink for about one minute. It’s important that you do this within one minute of turning your car back on again, or else it won’t work.
Once all four lights start blinking, drive faster than 16 miles per hour and continue driving normally until all four lights go out. Once they go out, you’re done programming your new or reset sensors and can normally drive again.
3. What is a sensor on a tire?
A sensor on a tire generally refers to TPMS. TPMS stands for Tire Pressure Monitoring System. Every TPMS sensor has a unique identification code.
The code is used by the Tire Pressure Monitoring System to match the sensor with the vehicle’s ECU. The code is important and needs to be programmed into the replacement TPMS sensor when it is fitted.
4. Does Costco change TPMS sensors?
Yes, they do. Some people think that Costco doesn’t change TPMS sensors because they are too expensive to replace.
This is not true. All Costco locations have the equipment and expertise to change TPMS sensors in both passenger and light truck tires.
The cost of a Lexus Tire Pressure Monitoring System Relearn depends on your model and year.
Tire Pressure Monitoring System Relearns are included in the price of many major repairs, but if you just need this done, it can cost from $44 to $56, depending on your vehicle’s make, model, and year.
Whether or not you can do this job yourself depends on your level of mechanical ability and your willingness to learn. If you’re an experienced DIYer, you may be able to handle it.