If you own a Ford Fusion, you may have experienced Ford Fusion Thermostat Problems. This is a common problem with this model of car, and it can be quite frustrating. There are a few things that you can do to try and fix the problem, but if it persists, you may need to replace the thermostat.
In this article, we will discuss some of the most common Ford Fusion thermostat problems and how to fix them.
If you’re driving a Ford Fusion, you may want to keep an eye on your thermostat. There have been reports of problems with the thermostats in these vehicles, and it can lead to some serious issues if not addressed.
The most common problem seems to be that the thermostat gets stuck in the “open” position. This can cause your engine to overheat, which can lead to all sorts of other problems.
If you notice that your engine is running hotter than usual, or that the temperature gauge is reading higher than normal, it’s a good idea to check your thermostat. Another issue that has been reported is that the thermostat housing can crack, causing coolant to leak out.
This can also lead to overheating and other issues. If you see any signs of coolant leakage, it’s important to have it checked out immediately. If you’re having any problems with your Fusion’s thermostat, it’s best to take it to a qualified mechanic for diagnosis and repair.
Trying to fix it yourself could end up making things worse, so it’s always best to leave it in the hands of someone who knows what they’re doing.
Read More About Ford Sirius Radio Problems (Full Guide)
How to solve Ford Fusion Thermostat Problems
Did you know that a broken Ford Fusion thermostat can cause your car to overheat? If water isn’t able to circulate through the radiator, this overheating can lead to cracks in the engine block and an expensive repair.
In this post, we explore some ways that you can solve Ford Fusion Thermostat Problems by preventing your vehicle from overheating and avoiding car repair expenses.
The Ford Fusion is a mid-size sedan from the Ford Motor Company that has been in production since 2005. The design of the car has been constantly updated to keep up with the competition and has even won awards for its styling.
As cars get older, however, they start experiencing problems, and some of these issues affect all makes and models. One common problem that you may be able to solve by following some simple steps yourself is a thermostat problem.
P0128 How I Changed A Thermostat On A 2.3 Ford Fusion. Pretty Involved Job.
This is the original Ford Fusion Thermostat problem. I will show you step-by-step on changing this thermostat. I took my time to explain the process, so you don’t get hurt or lost.
- First, it’s important to make sure the engine is off. This will eliminate any possibility of injury if you manage to cross wires during the procedure.
- Second, make sure your car is level and stable with only the parking brake engaged.
- Third, locate and remove the air conditioning compressor. This will give you more room to work.
Ford Fusion Thermostat Location
If you’re like most people, you probably don’t think much about your car’s thermostat. But if it fails, your car can overheat and cause serious engine damage. That’s why it’s important to know where your thermostat is located and how to change it if necessary.
In most cars, the thermostat is located near the radiator, in front of the engine. On a Ford Fusion, however, the thermostat is located on the passenger side of the engine block, behind the cylinder head.
To change the thermostat on a Ford Fusion, first, remove the negative battery cable to prevent an electrical short.
Then remove the plastic cover from around the thermostat housing and unscrew the housing itself. Carefully pull out the old thermostat and replace it with a new one before screwing everything back into place.
Finally, reconnect the negative battery cable and start up your car to make sure everything is working properly.
Ford Fusion Thermostat Housing
If your Ford Fusion is overheating, one possible cause could be faulty thermostat housing. The thermostat housing regulates the flow of coolant and helps to keep your engine at the correct temperature. If it’s damaged or not functioning properly, it can cause your engine to overheat.
In some cases, the entire thermostat housing must be replaced. Other times, just the gasket needs to be replaced. Either way, it’s a fairly simple repair that can be done at home with minimal tools and experience.
Ford Fusion Thermostat Replacement
If your Ford Fusion is overheating, or if the temperature gauge isn’t working properly, it may be time to replace the thermostat. This is a relatively easy repair that you can do at home, and it doesn’t require any special tools. Before you begin, make sure that your Fusion is cool.
You don’t want to be working on this repair when the engine is hot. Once you’ve confirmed that the engine is cool, locate the thermostat housing. It will be on the upper radiator hose, and it will have two hoses attached to it.
Remove the bolts that hold the housing in place, and then remove the housing itself. Be careful not to lose the gasket that sits between the housing and the engine block. Inside of the housing, you’ll see the thermostat itself.
Remove it and discard it. To install the new thermostat, simply reverse these steps. Put the new thermostat in place, making sure that it’s oriented correctly, and then bolt everything back into place.
Once you’ve done that, fill up your radiator with antifreeze/coolant and start up your car to check for leaks. If everything looks good, you should be all set.
2017 Ford Fusion Thermostat Location
In 2017, the Ford Fusion’s thermostat is located in the engine compartment on the passenger side. It is a black, rectangular box with a metal housing and two hoses running to it. The thermostat controls the engine’s coolant temperature and is an important part of the cooling system.
If it fails, the engine can overheat and cause damage.
Read Also Ford E250 Transmission Problems
2011 Ford Fusion Thermostat Location
2011 Ford Fusion Thermostat Location The thermostat on the 2011 Ford Fusion is located in the engine bay, on the passenger side of the vehicle. It is mounted to the coolant outlet housing and is accessible from underneath the engine cover.
2010 Ford Fusion Thermostat Replacement
If your 2010 Ford Fusion is having problems with the thermostat, you may need to replace it. Here’s how to do it yourself. First, open the hood and locate the thermostat housing.
It will be on the driver’s side of the engine, near the top. Next, use a wrench to remove the two bolts that hold the housing in place. Be careful not to drop them into the engine.
Once the housing is loose, you can pull it off and access the thermostat itself. Carefully remove it from its seat and discard it. Now, take your new thermostat and insert it into the housing.
Make sure it’s seated properly, then replace the housing and bolts. Tighten everything down securely, then close up your Fusion’s hood and start her up.
Check the temperature gauge to make sure everything is working properly – if not, you may need to bleed your cooling system (consult your owner’s manual for instructions).
Otherwise, enjoy your newly fixed Fusion.
2011 Ford Fusion Thermostat Replacement
If your Ford Fusion is having issues with the thermostat, it may be time for a replacement.
Here is a step-by-step guide on how to do this procedure yourself, and save some money in the process.
- Start by disconnecting the battery, and then draining the coolant from the radiator.
- Next, remove the bolts that hold the thermostat housing in place. The housing is located on the engine block, just above the water pump.
- Carefully remove the old thermostat from its housing, being careful not to damage any of the surrounding gaskets or seals.
- Install the new thermostat into its housing, and then reinstall all of the bolts you removed earlier. Torque them to the manufacturer’s specifications.
What Are The Symptoms Of A Failing Thermostat?
If your car’s thermostat is failing, you may notice one or more of the following symptoms:
- The engine coolant temperature gauge may read higher than normal, or jump around erratically.
- The engine may run hot, even when the coolant level is full.
- The “check engine” light may come on.
- There may be steam coming from under the hood.
How Does A Car Act When The Thermostat Is Bad?
If your car’s thermostat is bad, it can cause a few different issues. The most common issue is that the car will overheat. This can happen because the thermostat is not regulating the temperature of the engine properly.
In some cases, the car may also run cooler than normal or take longer to warm up. If you notice any of these issues, it’s important to take your car to a mechanic to have the thermostat checked and replaced if necessary.
How Much Does It Cost To Replace A Thermostat In A Ford Fusion?
If your Ford Fusion is having issues with the thermostat, it may need to be replaced. The cost of replacing a thermostat in a Ford Fusion will vary depending on the year and model of the vehicle, as well as the labor costs of the mechanic or dealership. In general, you can expect to pay between $100 and $200 for a new thermostat, plus labor costs.
FAQ’s
What are the symptoms of a bad thermostat on a fusion?
The symptoms of a bad thermostat are the same as a car that needs to have its radiator flushed, like a Ford Fusion.
- The temperature gauge on your Ford Fusion goes up quickly or doesn’t go back down after driving.
- The engine overheats while going down the road. You may see steam or hot water coming out from under your hood or under your Ford Fusion’s radiator cap.
Why is my Ford Fusion not heating up?
There are several reasons why your car hasn’t been heating up lately. A Ford Fusion thermostat problem can be the culprit.
A faulty thermostat can cause your engine to overheat, resulting in major damage that can cost you thousands of dollars to repair or replace. To avoid the hassle and expense, learn how to tell if it is time to change your thermostat before it is too late.
What kind of engine failure does a Ford Fusion have?
A Ford Fusion has an engine that is a 4-cylinder, 16-valve engine. The engine has a total of 134 horsepower and 144-foot pounds of torque. Its maximum speed is about 120 mph.
What causes the Ford Fusion coolant temperature sensor code?
A Ford Fusion coolant temperature sensor code means there is an issue with the thermostat or thermostat housing. This code can be caused by a cracked or broken thermostat, an improperly-working thermostat, or a stuck sensor in the engine.
Ford Fusion overheating on hills
Conclusion
If you own a Ford Fusion, you may be having Ford Fusion Thermostat Problems. Many owners have reported that their cars are overheating, and the problem seems to be with the thermostat. Ford has issued a recall for the Fusion, and they are working on a fix for the problem.
In the meantime, if you are having issues with your thermostat, you can take your car to a dealership or an independent mechanic to have it checked out.
