There have been a lot of reports recently of drivers not being able to disable Active Fuel Management (AFM) on their vehicles. The Range Technology AFM Disabler problems is something we don’t like.
This is a feature that allows the car to manage fuel consumption in order to maintain a set range. AFM is intended to help reduce gas consumption, but some drivers have said that it has caused their cars to lose power and even stall.
There are a few common problems that can occur with Active Fuel Management (AFM) disablers, which can impact the performance of your vehicle. In this article, we’ll cover some of the most common range AFM disabler problems and how to fix them.
Range Technology AFM Disable Device
- Keep your vehicle in V8 mode; Disable 4 cylinder mode on all GM Active Fuel Management Vehicles
- Installs in seconds; Plugs into diagnostic port with no tools needed
- Does not reprogram factory ECU; Leaves no trace
- Full power all the time; Increased throttle response and more consistent power delivery across the entire power band
The Range Technology AFM Disable Device restores the factory fuel mapping and timing for certain trucks and cars, which the vehicle manufacturer for emissions disabled.
This is necessary for older engines to work correctly because, without it, they run with too much timing and air-fuel ratio, which will create excessive emissions.
This device does not affect your motor oil or cause check engine lights. Range Technology AFM Disable Device For 2014 and newer VW/Audi 2.0L TDI diesel vehicles Durable for the harsh road conditions – Made with the highest strength materials.
The device can be particularly useful for those who are looking to turn off v4 mode in Chevy Silverados.
Range Technology AFM Disabler Problems
Before starting problem, let start with a review with the advantages disadvantages-
The Range Technology Active Fuel Management Disabler restores the full horsepower, torque, and fuel efficiency of your 2014 Ram 1500 while completely disconnecting the exhaust manifold, which prevents up to 3/4 of your engine’s cylinders from cylinders firing.
Designed by a Cummins diesel technician with over 50,000 + miles in real-world driving, this is the highest quality product on the market guaranteed to work with all 2014+ gas Cummins engines!
There are a few disadvantages to using a range AFM disabler, but the benefits definitely outweigh them. First and foremost, range AFM disablers can be difficult to use and require a fair amount of practice to get used to.
Secondly, they can be dangerous if not used properly. Thirdly, they can be quite expensive, and fourthly, they may not work for everyone.
If you are experiencing any of the following problems with your range AFM disabler, it is important to get it fixed as soon as possible:
Higher Engine Stress
Your engine may be working harder than it should, and this can cause higher engine stress and wear and tear on your range technology AFM disabler.
High Exhaust Noise
The range technology AFM disabler may be contributing to high exhaust noise, which can be disruptive and annoying.
Lifter Failure
If the lift motor is not working properly, the range AFM disabler may also be experiencing lift failure. This can lead to serious accidents.
Unresponsiveness
If the range AFM disabler is not responding properly, this can cause a number of problems, including higher fuel consumption and emissions.
Will Disabling AFM Hurt Engine?
Disabling AFM (Active Fuel Management) in an engine might hurt its performance and fuel efficiency. Engine damage can result from excessive wear and decreased engine performance.
Additionally, disabling AFM might decrease the engine’s fuel efficiency because the system will use more fuel to achieve the same power output. Additionally, if the engine has been damaged by AFM in the past, disabling it may make the situation worse.
Does Range AFM Disabler Work?
Range Active fuel management disabler does work as advertised. There are a variety of reasons why a car may not be able to achieve optimum fuel economy, and disabling range Active can help resolve many of these issues.
Range Active is a system that helps the car maintain an optimum distance from the vehicle in front of it and disable it, which allows the car to achieve a higher fuel economy.
Should I Disable AFM?
There are pros and cons to disabling Active fuel management, so it is important to weigh the benefits and drawbacks before making a decision.
Disabling Active fuel management can improve fuel economy and emissions, but it can also result in reduced performance and increased emissions when the car is cold.
Additionally, disabling Active fuel management can cause the car to run hotter and may result in a decreased lifespan of the engine.
So, should you disable Active fuel management? Yes, if you want to improve fuel economy and emissions. No, if you want to avoid any potential negative consequences.
Will An AFM Disabler Void Warranty?
No, BY USING an Active fuel management Disabler, the factory warranty will not be voided. However, it is important to be aware that disabling Active fuel management may result in decreased fuel efficiency and increased emissions.
It is also important to remember that disabling Active fuel management could void your warranty if the system fails as a result.
In order to ensure that you are making the most appropriate decision for your vehicle, it is important to speak to a qualified technician.
Range Technology AFM Disabler Problems
Range technology Active fuel management disabler problems can cause higher engine stress, high exhaust noise, lift failure, and unresponsiveness.
This is because when the Active fuel management disabler is enabled, the engine is not able to correctly gauge the amount of fuel it needs to run effectively.
As a result, the engine may run at a higher stress level, which can lead to higher exhaust noise and lift failure. In addition, the Active fuel management disabler can also cause the vehicle to be less responsive, as it is not able to communicate with the transmission properly.
Does The Range AFM Disabler Cause Transmission Problems
There is no evidence to suggest that the Range Disable device will cause transmission problems. This device is designed to disable the fuel management system on cars in order to reduce emissions.
In addition, the device is designed to operate within the confines of the car’s electrical system and does not interfere with other car systems.
Does The Range AFM Disabler Work
The range Active fuel management disabler does work. However, there are some caveats. The range Active fuel management disabler will disable the active fuel management system in the vehicle in order to improve fuel economy.
While this may improve fuel economy, it may also result in a decrease in power and performance. Additionally, since the range Active fuel management disabler bypasses the vehicle’s security system, it is possible that it could result in a loss of data or damage to the vehicle.
What Is A Range AFM Disabler
A range active fuel management disabler is a device that will allow your V8 or V6 GM car to at all times run in full cylinder mode.
This can be a lifesaver in cases where you experience a misfire or a loss of power in one or more of your cylinders.
By allowing the engine to run in full cylinder mode, you can bypass the damaged cylinder and continue to drive. In some cases, this can even restore power to the engine and allow you to drive to a mechanic.
Is Range AFM Disabler Safe
Range AFM disabler can be safe if used as directed. However, there is always a risk of unintended noise emissions. If you are concerned about the potential noise emissions from your GM truck, it is important to speak to a technician about the best way to disable the range AFM disabler. This will help to mitigate the risk of noise emissions and ensure that your GM truck operates safely and efficiently.
How Does Range AFM Disabler Work
The range Active fuel management disabler works by bypassing your GM vehicle’s active fuel management system.
This allows your engine to run at full cylinders, which can help restore power and improve performance in cases where you experience a misfire or loss of power.
Bypassing the vehicle’s security system is also possible, so there is always a risk of data loss or damage to your car.
Is dod delete worth it?
Range Technology AFM DOD Delete offers secure data erasure to protect sensitive information. Invest in this feature if data security matters to you. The device ensures complete data destruction and prevents data recovery. Make the most of Range Technology AFM DOD Delete to safeguard your data.
Conclusion
Range AFM disabler is a device that can be very helpful in restoring power and performance in cases where you experience a misfire or loss of power.
Bypassing the vehicle’s security system is also possible, so there is always the risk of data loss or damage to your car.
It’s important to speak with a technician about disabling range AFM disabler before use, as this will help to mitigate the risk of noise emissions and ensure the safe operation of your GM truck. I hope this article tells everything about the range AFM disabler problems.
